00 81L 11PPPPI0090 000001 01Oventrop GmbH & Co. KG 29.03.24 000002 02OVENTROP GmbH & Co.KG - Online GAEB Export 000003 08EUR EURO 000004 11 1 N Titel 000005 12Leistungspositionen 000006 21 1 1 NNN 00000001000Stck 000007 25OVENTROP-Instantaneous water heater module 000008 26 Instantaneous water heater module for electronic 000009 26 reheating of the potable water, which can be 000010 26 installed as an optional extension module to the 000011 26 Regudis W-HTE dwelling station in order to heat the 000012 26 potable water temperature to a higher value than that 000013 26 achievable by the heating water temperature. The 000014 26 Regudis W-HTE dwelling station heats the potable 000015 26 water depending on the heating water quantity and the 000016 26 heating water temperature. If the heat output 000017 26 transferred to the potable water by the station is 000018 26 not sufficient to reach the desired potable water 000019 26 temperature, the temperature is increased to the set 000020 26 value by the instantaneous water heater module, which 000021 26 is only suitable for reheating. The electronics of 000022 26 the instantaneous water heater regulate the heating 000023 26 capacity depending on the selected outlet temperature, 000024 26 the respective inlet temperature and the flow rate. 000025 26 The desired outlet temperature can be set by pressing 000026 26 a key and be read on the LCD display.   It is 000027 26 recommended to use the instantaneous water heater 000028 26 module with the Regudis W-HTE dwelling station 000029 26 performance range 3, as the pressure losses and the 000030 26 excess temperature are very low here. A combination 000031 26 with the potable water circulation module is not 000032 26 possible. The instantaneous water heater module is 000033 26 suitable for wall mounting and for integrated 000034 26 mounting in the flush-mounted cabinet, item number 000035 26 1344599, or in the surface mounted cabinet, item 000036 26 number 1344699. A connection and piping set, item no. 000037 26 1344561, for integrated mounting is optionally 000038 26 available. The compact design with 110 mm 000039 26 installation depth in conjunction with the Regudis 000040 26 W-HTE dwelling station is retained. Including 000041 26 fixing material. Electrical data: Rated power: 11 000042 26 / 13.5 kW 000043 26 Rated current: 16 / 19.5 A 000044 26 Required min. cable cross-section: 1.5 mm² / 2.5 mm² 000045 26 Nominal voltage: 3~ / PE 380...415 V AC 000046 26 Frequency: 50 / 60 Hz 000047 26 Connection: Fixed connection 000048 26 Energy efficiency class according to EU Regulation No. 000049 26 812/2013: A 000050 26 Protection class according to VDE: I 000051 26 Protection category: IP 24   General data: 000052 26 Connection: G ½ 000053 26 Dimensions (-W x H x D): 177 x 294 x 108 mm 000054 26 Casing colour: white 000055 26 Flow limiter: without 000056 26 Control range: 20 °C to 60 °C 000057 26 Max. operating temperature: 60 °C 000058 26 Max. ambient temperature: 60 °C 000059 26 Max. storage temperature: 60 °C 000060 26 Max. ambient humidity: <70% non-condensing 000061 26 Max. operating pressure: 10 bar 000062 26 Pressure loss at 11 l/min: 1.8 bar 000063 26 Switch-on water volume: 2 l/min 000064 26 Nominal draw off capacity (potable water heating 35 000065 26 °C/50 °C): 11 l/min 000066 26 Max. draw off capacity: 15 l/min 000067 26 Power Regudis W-THE Performance range 3 with 000068 26 Instantaneous water heater module (potable water 000069 26 heating 10 °C/50 °C): 42 kW 000070 26 Application range electrical conductivity at 15 °C: ? 000071 26 1000 µS/cm 000072 26 Construction: pressure-resistant 000073 26 Nominal content: 0.3 l 000074 26 Weight (with water filling): 2.7 kg 000075 26 000076 26 000077 26 000078 26 Art.-Nr.: 1344560 000079 26 EAN-Code: 4026755477474 000080 26 Hersteller: OVENTROP GmbH & Co. KG, Olsberg 000081 26 Subject to technical changes. 000082 31 1 000083 99 00001000084