00 81L 11PPPPI0090 000001 01Oventrop GmbH & Co. KG 28.03.24 000002 02OVENTROP GmbH & Co.KG - Online GAEB Export 000003 08EUR EURO 000004 11 1 N Titel 000005 12Leistungspositionen 000006 21 1 1 NNN 00000001000Stck 000007 25OVENTROP-Regumaq X-45 Fresh water station 000008 26 Regumaq X-45 fresh water station, heat exchanger 000009 26 copper brazed with SealixR protective layer 000010 26 000011 26 The Regumaq X-45 fresh water station is an 000012 26 electronically controlled product assembly with heat 000013 26 exchanger for the hygienic heating of potable water 000014 26 according to the continuous flow priniple. 000015 26 000016 26 The potable water circuit and the storage cylinder 000017 26 circuit are separated by the system in that the media 000018 26 that are heated up and the media that give off heat 000019 26 flow alternately through the composite wave-shaped 000020 26 plates of the heat exchanger. The heat exchanger is 000021 26 designed to create a turbulent flow. This leads to a 000022 26 high heat exchange and a self-cleaning effect for a 000023 26 long service life. The variant with SealixR 000024 26 protective layer provides additional safety at 000025 26 installation sites with critical water conditions. 000026 26 000027 26 The station is equipped with an electronic control. 000028 26 The control system consists of a controller box 000029 26 inside the station and a control element with touch 000030 26 surface that is accessible even when the thermal 000031 26 insulation is closed. The controller is wired ready 000032 26 to plug in for quick and easy commissioning. The 000033 26 controller box is connected to the control element 000034 26 without plugs via magnetic contacts. The contacts are 000035 26 closed or separated by mounting and removing the 000036 26 upper shell. The controller is equipped with a total 000037 26 of 5 programmable relays. Consumers (e.g. pumps, 000038 26 valves or similar) can be connected to the relays. 000039 26 000040 26 Sensors detect the current volume flow and the 000041 26 temperature in the potable water circuit and in the 000042 26 storage cylinder circuit. The controller uses this 000043 26 information to calculate the pump speed required to 000044 26 achieve the desired potable water temperature. 000045 26 000046 26 The potable water is heated at the moment it is 000047 26 needed. The storage of hot potable water is not 000048 26 necessary when using this station. Since no hot 000049 26 potable water is stored, the risk of legionella 000050 26 formation is minimised by the system. 000051 26 000052 26 By providing hot potable water according to demand, 000053 26 standby heat losses are avoided, especially when 000054 26 potable water consumption is low. 000055 26 000056 26 You protect the environment and save heating costs 000057 26 without having to forego the comfort you are used to.  000058 26 000059 26 Dimensions (outer dimensions insulation): width: 400 000060 26 mm, height: 625 mm, depth: 240 mm 000061 26 000062 26 000063 26 Connection: External thread 000064 26 000065 26 Item no.: 1381142 000066 26 EAN-Code: 4026755465105 000067 26 Manufacturer: OVENTROP GmbH & Co. KG, Olsberg 000068 26 Subject to technical changes. 000069 31 1 000070 99 00001000071