00 81L 11PPPPI0090 000001 01Oventrop GmbH & Co. KG 28.03.24 000002 02OVENTROP GmbH & Co.KG - Online GAEB Export 000003 08EUR EURO 000004 11 1 N Titel 000005 12Leistungspositionen 000006 21 1 1 NNN 00000001000Stck 000007 25OVENTROP-Drywall element for Cofloor drywall system 000008 26 The Cofloor drywall system consists of drywall 000009 26 elements and matching heat/cooling conducting 000010 26 lamellas. The drywall basic element consists of 25 mm 000011 26 thick foamed PS (polystyrene). It is a thermal 000012 26 insulation and at the same time a support element for 000013 26 the individual heat/cooling conducting lamellas and 000014 26 bends. The special arrangement of the grooves in the 000015 26 basic elements allows both a meandering and a bifilar 000016 26 (spiral) installation of the Oventrop Copipe HSC 000017 26 multi-layer composite pipe 14 x 2 mm. We recommend 000018 26 the installation of the Copipe HSC multi-layer 000019 26 composite pipe due to its lower expansion coefficient 000020 26 during heating operation compared to the Copex 000021 26 PE-Xc and Copert PE-RT plastic pipes. The 000022 26 heat/cooling conducting lamellas are made of 0.4 mm 000023 26 thick and the heat/cooling conducting bends of 0.5 mm 000024 26 thick galvanised sheet steel and enable optimum 000025 26 heat/cooling transport into the drywall elements or 000026 26 into the cement or liquid screed. The practicable 000027 26 predetermined breaking points on the heat/cooling 000028 26 conducting lamellas (sheet length 998 mm) enable 000029 26 optimal laying of the pipes in the rooms. The 000030 26 installation of the Cofloor drywall system  is 000031 26 without waste, the execution of the complete 000032 26 installation is possible by only one person. 000033 26 Especially suitable for standard-compliant cement or 000034 26 liquid screed, but also for dry screed elements (e.g. 000035 26 Fermacell panels). 000036 26 000037 31 1 000038 99 00001000039