Logo Oventrop GmbH & Co. KG

Fresh water station "Regumaq XH"

Fresh water station "Regumaq XH" with Wilo pump Yonos PARA RS PWM 15/7 PWM 2, heat exchanger copper brazed (fresh water station)

Hydronically controlled product assembly with heat exchanger for the hygienic heating of potable water on the flow principle. The potable water is only heated at the moment when it is needed, i.e. "just in time".

Depending on the draw off capacity on the potable water side, the circulation pump on the heating side is switched on and the flow rate is regulated. The soldered plate heat exchanger complies with the specifications of the European Pressure Equipment Directive (PED).

Due to the turbulent flow, a good self-cleaning effect avoiding a contamination is achieved.

The components of the heat exchanger system have flat sealing connections, are pre-assembled on a carrier board and leak tested.

With Wilo pump Yonos PARA PWM RS 15/7 PWM2 in the buffer circuit.

Recommended discharge capacity: 15-20 l/min., depending on the set potable water temperature and the existing buffer water temperature

Control range of the potable water temperature: 40 ° - 60 °C

Connections: G ¾ flat sealing for the connection to the potable water circuit G 1 flat selaing for the connection to the storage cylinder circuit

Potable water circuit: Consisting of flow control, connection for circulation pipe (G ¾), heat exchanger, temperature sensor and flow switch.

Storage cylinder circuit: Consisting of storage cylinder pump, heat exchanger, venting valve, flow control and thermostatic valve.

Dimensions (outer dimensions of the insulation): Width: 400 mm, Height: 690 mm, Depth: 190 mm
No longer produced
Art.No.: 1381042
EAN: 4026755400397
Výrobce: Oventrop GmbH & Co. KG
Subject to technical changes.


Rozměry výrobku

Délka Šířka Výška Hmotnost
190 mm 400 mm 690 mm 15,05 kg

Jednotky balení

Typ Množství Délka Šířka Výška Hmotnost
Lepenková krabice 1 220 mm 420 mm 710 mm 15,96 kg


Product images

  Velikost souboru
1,5 MB
  Velikost obrázku
5128 px x 5128 px
  •  Unikátní obrázek výrobku
  •  Samostatný
  Velikost souboru
1,52 MB
  Velikost obrázku
5128 px x 5128 px
  •  Unikátní obrázek výrobku
  •  Samostatný


  Velikost souboru
246,7 KB
  Velikost obrázku
595 px x 1057 px
  •  Unikátní obrázek výrobku
  •  Samostatný



  Jméno Velikost souboru
L_138106082.pdf 1,49 MB
L_138104280.pdf 8,18 MB


ETIM 7.0 EC010869
Hot tap water heater, indirectly fired
Property Value
Width 400 mm
Height 690 mm
Depth 186 mm
Material quality Stainless steel 316 (1.4401)
Connection supply External thread
Connection return External thread
Max. temperature 95 °C
Nominal internal diameter hot tap water 3/4 inch (20)
Nominal inner diameter cold tap water 3/4 inch (20)
Max. operating pressure 600 bar
Exchanger material Stainless steel
Cold tap water connection External thread
Hot tap water connection External thread
Nominal inner diameter of supply 1 inch (25)
Nominal inner diameter return 1 inch (25)