Dwelling station "Regudis W-HTU"
15 l/min., heat exchanger copper brazed, without cold water outlet
OVENTROP-"Regudis W-HTU" Dwelling station Hot potable water performance range - 15 l/min.
For the supply of heat and potable water to individual dwellings without using auxiliary energy. Station completely pre-assembled on a base plate, leakage and function tested at works.
Model without cold water outlet dwelling and without spacer for water meter.
Consisting of:
-Copper brazed stainless steel heat exchanger, vertically installed, which reduces the risk of calcification
-Proportional flow controller with potable water priority funtion and integrated cold water throttling disc (the components of the potable water are coated)
-Thermostatic temperature controller with quick- acting sensor for the control of the hot water outlet temperature
-Spacer for heat meter installation 110 mm, G ¾ with reducer for sensor connection G ½ for use of direct immersion sensors
-Valve for zone control which can be equipped with an actuator
-Facility for the deaeration and draining of the heating circuit
-Differential pressure regulator in the primary return for differential pressure regulation during quickly alternating operational conditions when drawing off hot water
-Strainer in the primary supply and heating circuit return
-6 flat sealing G ¾ collar nuts for the connection of the station to the supply pipes and the potable water circuit of the dwelling
-Complete piping of the station made of stainless steel, 18 x1
Min. cold water pressure: without flow limiter: 2.0 bar
with flow limiter: 2.5 bar
Min. differential pressure supply: 300 mbar
Draw off temperature tdraw off: 40 °C up to 70 °C
Min. flow temperature: tdraw off + 15 K
max. operating pressure: 10 bar
max. operating temperature: 90 °C
draw off
capacity: 15
Item no.: 1341231
EAN: 4026755393552
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical modifications without notice.
Dimensions of article
Length |
Width |
Height |
Weight |
650 mm |
480 mm |
150 mm |
14,92 kg |
Packing units
Type |
Qty. |
Length |
Width |
Height |
Weight |
Carton |
1 |
660 mm |
490 mm |
165 mm |
16,02 kg |
Carton |
10 |
1200 mm |
800 mm |
1100 mm |
170,23 kg |
|
Properties
- Clear product picture
- Cutout
Download
|
|
Properties
- Clear product picture
- Cutout
Download
|
|
Properties
- Clear product picture
- Cutout
Download
|