Station for hot water preparation "Regumaq XZ-30"
with "Regtronic RQ", copper brazed heat exchanger


OVENTROP-Station for hot water preparation "Regumaq XZ-30-B" (fresh water station)

Electronically controlled product assembly with heat exchanger for the hygienic heating of potable water on the flow principle. The potable water is only heated when it is needed ,e.g "just in time". For connection to buffer storage cylinders. Depending on the temperature and the flow volume on the potable water side, the circulation pipe on the heating side is speed regulated.

The plate heat exchanger complies with the specifications of the European Pressure Equipment Directive (PED). Due to the turbulent flow, a good self-cleaning effect avoiding a contamination is achieved.

The plate heat exchanger can be flushed using the fill and drain cocks integrated in the primary and secondary circuit. The potable water circuit is protected by a 10 bar safety valve. The components of the heat exchanger system have flat sealing connections, are pre-assembled on a mounting board and leak tested.

The controller "Regtronic RQ-B" is wired up with the internal electric components and features a data bus (S-bus) for the connection to the data logger "CS-BS".

-Heat exchanger: 30 plates -Discharge capacity: 20-45 l/min., depending on the set potable water temperature and the existing buffer water temperature -Connections: G 1 flat sealing for the connection to the buffer and potable water circuit

Potable water circuit: -Circulation pump Wilo ZRS 15/4-3KU -3 ball valves with thermometer -Check valve at circulation connection -Volume flow sensor -Safety valve 10 bar -2 electronic resistance thermometers -2 fill and drain cocks

Buffer circuit: -2 electronic resistance thermometers -2 fill and drain cocks -Ball valves with and without check valve and thermometer -Circulation pump Wilo-Yonos PARA RS 15/7

Controller functions: -Control of the hot potable water temperature -Control of circulation (programmable: thermal or depending on demand) -Thermal disinfection -After-heating -Alarm function

Dimensions (outer dimensions of insulation): Width: 500 mm, Height: 860 mm, Depth: 260 mm

max. operating pressure: 10 bar
max. operating temperature: 95 °C

Item no.: 1381035
EAN: 4026755400892
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical modifications without notice.
Download GAEB Download tender text
Dimensions of article
Length Width Height Weight
860 mm 510 mm 270 mm 26,17 kg
Packing units
Type Qty. Length Width Height Weight
Carton 1 895 mm 530 mm 305 mm 28,41 kg
Europallet 3 1200 mm 800 mm 1070 mm 106,22 kg
Oventrop „Regumaq“ (english)

Oventrop „Regumaq“ station for hot water preparation

Product pictures
  File size
149,7 KB
  Size
1024 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
151,11 KB
  Size
1024 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
Drawings
  File size
68,36 KB
  Size
595 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
Technical data
  Name Size
“Regumaq X-30” / “Regumaq XZ-30” Fresh water stations 2,54 MB
Manual
  Name Size
138106082.pdf 1,49 MB
138103080.pdf 6,68 MB
138103082.pdf 3,08 MB
135727081.pdf 538,27 KB