Download GAEB
OVENTROP-Fresh water station "Regumaq XH" with Wilo pump Yonos PARA RS PWM 15/7 PWM 2, heat exchanger copper brazed (fresh water station)

Hydronically controlled product assembly with heat exchanger for the hygienic heating of potable water on the flow principle. The potable water is only heated at the moment when it is needed, i.e. "just in time".

Depending on the draw off capacity on the potable water side, the circulation pump on the heating side is switched on and the flow rate is regulated. The soldered plate heat exchanger complies with the specifications of the European Pressure Equipment Directive (PED).

Due to the turbulent flow, a good self-cleaning effect avoiding a contamination is achieved.

The components of the heat exchanger system have flat sealing connections, are pre-assembled on a carrier board and leak tested.

With Wilo pump Yonos PARA PWM RS 15/7 PWM2 in the buffer circuit.

Recommended discharge capacity: 15-20 l/min., depending on the set potable water temperature and the existing buffer water temperature

Control range of the potable water temperature: 40 ° - 60 °C

Connections: G ¾ flat sealing for the connection to the potable water circuit G 1 flat selaing for the connection to the storage cylinder circuit

Potable water circuit: Consisting of flow control, connection for circulation pipe (G ¾), heat exchanger, temperature sensor and flow switch.

Storage cylinder circuit: Consisting of storage cylinder pump, heat exchanger, venting valve, flow control and thermostatic valve.

Dimensions (outer dimensions of the insulation): Width: 400 mm, Height: 690 mm, Depth: 190 mm

Item no.: 1381042
EAN: 4026755400397
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical modifications without notice.
Download GAEB