Logo Oventrop GmbH & Co. KG

Boiler connection system "Regumat S-180" DN 25
without pump, with pump ball valve and universal insulation


Boiler connection system "Regumat S-180" DN 25 without pump, with pump ball valve and universal insulation

Product assembly for the connection of the boiler to the pipework.

Consisting of: -Isolation device with 2 ball valves and 2 thermometers (without pressure relief device) -Wall bracket -Flanged pipe -Insulation -Check valve -Pump ball valve at the pump inlet -Distance piece

With universal thermal insulation of modular construction.

Any standard pump (DN 25, length 180 mm, G 1½ male thread) can be installed.

Suitable for the installation of the following high-efficiency pumps:

- Wilo-Yonos PARA - Wilo-Stratos PICO 25/1-4/6 - Wilo-Stratos ECO 25/1-5 - Grundfos ALPHA 25-40/60 - Laing series Ecocirc - Biral AX 13-1

On delivery, the supply pipe is on the right hand side. If required, the supply and the return pipe can be changed on site. The actuator can be mounted without tools - "plug & play".

Insulation: 248 x 465 mm Distance between pipe centres: 125 mm Length of product assembly: 411 mm

Connection: To heating circuit: G 1½ male thread, flat sealing To boiler: G 1½ male thread, flat sealing

Max. operating temperature 95 °C for high-efficiency pumps.
Art.No.: 1357070
EAN: 4026755419009
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical changes.

Accessories

Room thermostat - surface mounting 24 V
Item no. 1152052
Heating circuit controller "Regtronic RH", with 1 outdoor sensor (bus-compatible), 2 additional sensors (PT1000) and remote control including room temperature sensor (PT1000)
Item no. 1152080
Heating circuit controller "Regtronic RH", with 1 outdoor sensor (bus-compatible) and 3 additional sensors (PT1000)
Item no. 1152083
Room controller with operating switch, remote control and room temperature sensor PT1000, for "Regtronic RH"
Item no. 1152087
Load relay, 2-phase cabled with the housing
Item no. 1152089
Room temperature sensor PT 1000 for heating circuit controller "Regtronic RH"
Item no. 1152095
Remote control with room temperature sensor PT 1000 for heating circuit controller "Regtronic RH"
Item no. 1152096
Outside temperature sensor for heating circuit controller "Regtronic RH"
Item no. 1152099
Regtronic KM TCP Communication module Modbus TCP
Item no. 1159099
Heat meter installation set with integrated temperature sensor connection at the pump ball valve and adapters
Item no. 1352250
Regumat Tailpipe set DN 25 Collar nut, G 1 ½, brass, 4-fold
Item no. 1350451
Regumat Tailpipe set DN 25 Collar nut G 1 ½, weldable tailpipe, 2-fold
Item no. 1350455
Regumat Tailpipe set DN 25 Collar nut G 1 ½, solder tailpipe 28 mm, 2-fold
Item no. 1350456
Connection set for Regumat DN 25 Collar nut G 1 ½, weldable tailpipe 1", 4-fold
Item no. 1350465
Regumat Tailpipe set DN 25 Collar nut G 1 ½, solder tailpipe 28 mm, 4-fold
Item no. 1350466
Regumat Tailpipe set DN 25 Collar nut G 1 ½, threaded tailpipe Rp 1, 4-fold
Item no. 1350467
Regumat Tailpipe set DN 25 Weldable tailpipe, 2-fold
Item no. 1350594
Regumat Tailpipe set DN 25 Solder tailpipe 28 mm, 2-fold
Item no. 1351095
Regumat Tailpipe set DN 25 Threaded tailpipe Rp 1, 2-fold
Item no. 1351394
Extension module for "Regumat" modular distributor DN 25, with insulation
Item no. 1351470
Modular distributor "Regumat" DN 25 for 2 heating circuits, brass
Item no. 1351471
Modular distributor "Regumat" DN 25 for 3 heating circuits, brass
Item no. 1351472
Distributor for "Regumat" DN 25 with insulation, for 2 heating circuits, bronze
Item no. 1351571
Distributor for "Regumat" DN 25 with insulation, for 2 heating circuits, steel
Item no. 1351582
Distributor for "Regumat" DN 25 with insulation, for 3 heating circuits, steel
Item no. 1351583
Distributor for "Regumat" DN 25 with insulation, for 4 heating circuits, steel
Item no. 1351584
Distributor for "Regumat" DN 25 with insulation, for 5 heating circuits, steel
Item no. 1351585
Distributor for "Regumat" DN 25 with insulation, for 6 heating circuits, steel
Item no. 1351586
Distributor for "Regumat" DN 25 with insulation, for 7 heating circuits, steel
Item no. 1351587
Distributor for "Regumat" DN 25 with insulation, for 8 heating circuits, steel
Item no. 1351588
Hydronic header "MonoFixx" for "Regumat" DN 25 made of steel, with insulation and wall bracket, for one heating circuit
Item no. 1351589
Hydronic header with insulation, DN 25, connection G 1 ½ male thread
Item no. 1351590
Wall bracket for 2-fold distributor made of bronze, including fixing material
Item no. 1351592
Wall bracket for 2-fold modular distributor "Regumat", including fixing material
Item no. 1351593
Heat exchanger "Regumat" 14 plates up to 14 KW, with connection fitting, for "Regumat" DN 25
Item no. 1351596
Heat exchanger "Regumat" 30 plates up to 28 KW, with connection fitting, for "Regumat" DN 25
Item no. 1351696
Hydronic header/distributor combination "HydroFixx" for "Regumat" DN 25, for 2 heating circuits
Item no. 1351698
Hydronic header/distributor combination "HydroFixx" for "Regumat" DN 25, for 3 heating circuits
Item no. 1351699
Sealing plug for closing a pair of heating circuits at the distributor, 2-fold, DN 25, G 1½
Item no. 1351770
Distributor for "Regumat" DN 25 with insulation, for 3 heating circuits, steel, compact model
Item no. 1351783
Distributor for "Regumat" DN 25 with insulation, for 5 heating circuits, steel, compact model
Item no. 1351785
Wall mounting device for "Regumat" including fixing set
Item no. 1357097
Distance piece for "Regumat S" including collar nuts and seals
Item no. 1357086
Heating circuit controller extension set for "Regumat 180" DN 25 with pump ball valve
Item no. 1357290
Collar nut for boiler piping G 1 ½, brass, 1-fold
Item no. 1359099
Grounding clamp for "Regumat" DN 20 - DN 32
Item no. 1359995
Controller "Regtronic RM-B" System controller
Item no. 1369555
Regumat Tailpipe set DN 25 Collar nut G 1½, press connection 26 x 3mm, 1-fold
Item no. 1511946
Regumat Tailpipe set DN 25 Collar nut G 1½, press connection 32 x 3mm, 1-fold
Item no. 1511949

Spare parts

Flanged pipe for "Regumat S/M3" including collar nuts and seals
Item no. 1357091
Adapter for "Regumat" for Oventrop actuators manufactured since 2005
Item no. 1357088
Isolation device DN 25 for "Regumat", with 2 ball valves and 2 thermometers
Item no. 1353181
Thermal insulation For Regumat-180 DN 25 with pump ball valve
Item no. 1355091
Thermometer For Regumat-130 DN 25 and Regumat DN 32/40/50, blue
Item no. 1355093
Thermometer For Regumat-130 DN 25 and Regumat DN 32/40/50, red
Item no. 1355094
Insulation for "Regumat 180" DN 25 with pump ball valve, Grundfos ALPHA2 25-40
Item no. 1356090
Insulation for "Regumat 180" DN 25 with pump ball valve, Wilo-Stratos ECO 25/1-5
Item no. 1356091
Insulation for "Regumat 180" DN 25 without pump ball valve, Grundfos ALPHA2 25-40
Item no. 1356092
Thermal insulation for "Regumat 180" DN 25 including explanded metal and Oventrop plate
Item no. 1357096
Thermometer For Regumat-180 DN 25 (manufactured until 2015), blue
Item no. 1356293
Thermometer For Regumat-180 DN 25 (manufactured until 2015), red
Item no. 1356294
Pump ball valve for "Regumat S/M3" including collar nuts and seals
Item no. 1357089
Ball valve for isolation device "Regumat S/M3" including handle, collar nuts and seals, without thermometer
Item no. 1357090
Thermometer for "Regumat" DN 25/DN 32 blue
Item no. 1357098
Thermometer For Regumat DN 25 (manufactured from 2015), DN 32 (manufactured from 2013) and DN 32 plus, red
Item no. 1357099
Flanged pipe with check valve for "Regumat-180", DN 25, L = 279 mm
Item no. 1352272
Flanged pipe with check valve for "Regumat-180", DN 25, L = 180 mm
Item no. 1352273
Flanged pipe with check valve for "Regumat-180", DN 25, L = 361 mm
Item no. 1352297

Dimensions

Dimensions of article

Length Width Height Weight
213 mm 248 mm 465 mm 3,85 kg

Packing units

Type Qty. Length Width Height Weight
Carton 1 245 mm 275 mm 530 mm 4,4 kg
Europallet 30 1200 mm 800 mm 1350 mm 152,91 kg

CAD

Notice for CAD viewer

In order to open the CAD-Viewer and Download CAD-Data please onetime download and install the CAD-App.

Images

Product images

  File size
1,97 MB
  Size
4203 px x 3259 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
1,38 MB
  Size
5221 px x 5221 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Drawings

  File size
73,21 KB
  Size
486 px x 660 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
19,92 KB
  Size
425 px x 425 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Dimensional drawings

  File size
52,74 KB
  Size
1155 px x 809 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Documents

Technical data

  Name Size
db_1357072_en.pdf 2,03 MB

Manual

  Name Size
L_135507780.pdf 775,08 KB
L_135707080.pdf 2,85 MB
L_135727081.pdf 616,17 KB

Declaration of conformity

Characteristic curves

Loss of pressure

Bitte warten...
Kennline wird abgefragt

ETIM

Klassifizierung
ETIM 7.0 EC001110
Compact installation for heat pump
Property Value
Width 248 mm
Height 465 mm
Depth 213 mm
Connection 1 1/2 inch
With thermal insulation
With thermometer
Connection to Heating circuit
With circulation pump
With safety valve
With pressure gauge
With non-return valve
With filling- and draining valve
Max. flow rate 7 m³/h
With connection expansion reservoir
With automatic de-aeration