Fixing channel
for "Unibox", depth: 57 mm, with isolating facility
OVENTROP-Fixing channel with isolating facility
with cover plate and thermostat with remote control for "Unibox, depth: 57 mm
For heavyweight and lightweight walls, made of galvanised steel sheet for pipework installation out of the ground into the wall to the "Unibox". For the connection without distributors/ collectors and the room to room isolation of surface heating circuits.
Isolating facility consisting of: Isolating valve, venting and flushing valve, valve connection G ¾ for Oventrop compression fittings. Assembly without screws or rivets. Adaptation to the installation height via an adjustable extension. The adaptation to the installation depth for heavyweight walls is carried out by use of elbows. The fixing channel of lightweight walls is screwed directly onto the profiles. Additional cut-outs in the reverse side of the fixing channel allow the connection of the "Unibox" even from an adjoining room. The "Unibox" has to be mounted in the fixing channel only shortly before plastering commences. A special cover plate for the "Unibox" is supplied with the fixing channel. An exact installation of the "Unibox" is guaranteed by the variable installation options. The connection opening (rated break points) of the fixing channel allow the connection of all remote controls and remote sensors (mechanical or electric).
Height: extendible between 440 mm and 490 mm Width: 160 mm
Item no.: 1022654
EAN: 4026755401202
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical modifications without notice.
Dimensions of article
| Length |
Width |
Height |
Weight |
|
438 mm |
153 mm |
93 mm |
2,03 kg |
Packing units
| Type |
Qty. |
Length |
Width |
Height |
Weight |
|
Carton |
1 |
495 mm |
190 mm |
100 mm |
2,24 kg |
|
Properties
- Clear product picture
- Cutout
Download
|
|
Properties
- Clear product picture
- Cutout
Download
|
|
Properties
- Clear product picture
- Cutout
Download
|