Article

Differential pressure regulator "Hycocon DTZ" PN 16
DZR brass, DN 32, G 1½ male, nominal value 50 - 300 mbar

OVENTROP-“Hycocon DTZ” Differential pressure regulator PN 16

for a constant control of the set nominal value as proportional regulator working without auxiliary energy. Infinitely adjustable nominal value of 250 - 600 mbar. Nominal value can be locked and read off from the outside at any time. With direct isolation and draining and filling device. Installation the return pipe. Straight pattern model with soft seal.

Valve body, bonnet and regulator housing made of brass, inner parts made of brass resistant to dezincification (DZR). O-rings and diaphragm made of EPDM.

With integrated pressure test points and drain valves as well as insulation shells.

Both ports male thread with collar nuts.

Material: Brass
Surface: unplated

kvs: 6.8
Size: DN 32

Max. differential pressure: 1.5 bar
max. operating pressure: 16 bar
min. operating temperature: -10 °C
max. operating temperature: 120 °C

Item no.: 1062310
EAN: 4026755263749
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical modifications without notice.

Download GAEB Download tender text

Accessories

Locking pin with sealing wire for differential pressure regulator "Hycocon DTZ"
Item no. 1062092

Tailpipe sets for "Hycocon/Hydrocontrol/Hydromat" Set no. 5 = 2 weldable tailpipes for valve DN 32, steel
Item no. 1060595

Tailpipe sets for "Hycocon/Hydrocontrol/Hydromat" Set no. 6 = 2 solder tailpipes 35 mm for valve DN 32, brass
Item no. 1061096

Tailpipe sets for "Hycocon/Hydrocontrol/Hydromat" Set no. 7 = 2 tailpipes with male thread, R 1¼ for valve DN 32
Item no. 1061495

Tailpipe sets for "Hycocon/Hydrocontrol/Hydromat" Set no. 8 = 2 tailpipes with female thread, Rp 1¼ for valve DN 32
Item no. 1061395

mapress copper connection fitting bronze, 35 mm x G 1½ (collar nut)
Item no. 4201566

mapress stainless steel connection fitting Cr-Ni-Mo steel, 35 mm x G 1½ (collar nut)
Item no. 4201576

Viega Sanpress connection fitting bronze, 35 mm x G 1½ (collar nut)
Item no. 4201666

Viega Sanpress connection fitting stainless steel, 35 mm x G 1½ (collar nut)
Item no. 4201676

Dimensions of article

Length	Width	Height	Weight
189 mm	130 mm	195 mm	3,1 kg

Packing units

Type	Qty.	Length	Width	Height	Weight
Carton	1	197 mm	138 mm	215 mm	3,23 kg
Carton	5	428 mm	295 mm	487 mm	17,14 kg

Notice for CAD viewer

----------

Download Setup CAD-App

Open CAD-Viewer

Product pictures

	File size 112,82 KB Size 1024 px x 1024 px Properties Clear product picture Cutout Download

Drawings

	File size 94,26 KB Size 1010 px x 1024 px Properties Clear product picture Cutout Download

Technical data

	Name	Size
	“Hycocon DTZ” Differential pressure regulator PN 16	297,81 KB

Manual

	Name	Size
	106201682.pdf	787,14 KB