Logo Oventrop GmbH & Co. KG

Regucor WHS Energy storage centre
type 1000, heat exchanger copper brazed


Energy storage centre "Regucor WHS"

Modular system for solar-assisted supply of detached and semi-detached houses with heat and hot water. Storage cylinder and add-on groups coordinated functionally and thermodynamically, with integrated piping and plug-in cabling. For combination with classic (e.g. gas/oil) and regenerative heat generators (e.g. heat pump/solid fuel) in existing and new buildings.

Consisting of:

Buffer storage cylinder: System storage cylinder type 1000, nominal content 900 litres Total height (without insulation): 2055 mm Diameter (without insulation): 790 mm Max. pivot height (without insulation): 2100 mm Connections: 8 x G 1½ female thread Max. operating pressure ps: 3 bar (coil 10 bar) Operating temperature ts: 95 °C (coil 110 °C) With removable 140 mm fleece insulation and integrated temperature layer unit. Connections and fixing positions coordinated with "Regucor WHS" storage cylinder add-on groups.

Add-on group Solar: "Regusol L-130" DN 20 with circulation pump Wilo TEC ST 15/7 PWM, flow measuring device 2-15 l/min., with safety group for riser installation 6 bar, connections G ¾ male thread according to DIN EN 16313 (cone "Euro")

Add-on group fresh water: "Regumaq XH" DN 20 Hydraulically controlled heat exchanger system for the hygienic heating of potable water on the flow principle. Recommended discharge capacity: 15-20 l/min., depending on the set potable water temperature and the existing buffer water temperature. Connections G ¾ male thread flat sealing, with high-efficiency pump Wilo-Yonos PARA RS 15-7 PWM2, temperature controller 40 °C - 70 °C, copper brazed stainless steel heat exchanger.

Add-on group heating circuit: "Regumat M3-130" DN 20 For weather guided flow temperature control. Connections G 1 male thread, flat sealing. High-efficiency pump Wilo-Stratos PICO 15/1-6, with three-way mixing valve and actuator.

Multifunctional system controller: "Regtronic RS" for the control of the energy storage centre "Regucor WHS" and further installation components. Up to 13 free inputs and up to 9 free solid-state relay outputs. S-bus for the connection to the data logger "CS-BS", SD-card slot for data recording.
No longer produced
Art.No.: 1383555
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical changes.

Dimensions

Dimensions of article

Length Width Height Weight
1070 mm 790 mm 2120 mm 235 kg

Packing units

Type Qty. Length Width Height Weight

CAD

Notice for CAD viewer

In order to open the CAD-Viewer and Download CAD-Data please onetime download and install the CAD-App.

Images

Product images

  File size
2,76 MB
  Size
5551 px x 5567 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Drawings

  File size
102,46 KB
  Size
598 px x 1212 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Documents

Brochure

  Name Size
more languages 3,32 MB

5,44 MB
more languages 7,93 MB

ETIM

Klassifizierung
ETIM 7.0 EC011393
Boiler, indirectly fired, with control system
Property Value