Dwelling station "Regudis W-HTU"
15 l/min., heat exchanger copper brazed, without cold water outlet


OVENTROP-"Regudis W-HTU" Dwelling station Hot potable water performance range - 15 l/min.

For the supply of heat and potable water to individual dwellings without using auxiliary energy. Station completely pre-assembled on a base plate, leakage and function tested at works.

Model without cold water outlet dwelling and without spacer for water meter.

Consisting of:

-Copper brazed stainless steel heat exchanger, vertically installed, which reduces the risk of calcification
-Proportional flow controller with potable water priority funtion and integrated cold water throttling disc (the components of the potable water are coated)
-Thermostatic temperature controller with quick- acting sensor for the control of the hot water outlet temperature
-Spacer for heat meter installation 110 mm, G ¾ with reducer for sensor connection G ½ for use of direct immersion sensors
-Valve for zone control which can be equipped with an actuator
-Facility for the deaeration and draining of the heating circuit
-Differential pressure regulator in the primary return for differential pressure regulation during quickly alternating operational conditions when drawing off hot water
-Strainer in the primary supply and heating circuit return
-6 flat sealing G ¾ collar nuts for the connection of the station to the supply pipes and the potable water circuit of the dwelling
-Complete piping of the station made of stainless steel, 18 x1

Min. cold water pressure: without flow limiter: 2.0 bar
                                       with flow limiter: 2.5 bar
Min. differential pressure supply: 300 mbar
Draw off temperature tdraw off: 40 °C up to 70 °C
Min. flow temperature: tdraw off + 15 K

max. operating pressure: 10 bar
max. operating temperature: 90 °C
draw off
capacity: 15

Item no.: 1341231
EAN: 4026755393552
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical modifications without notice.
Dimensions of article
Length Width Height Weight
650 mm 480 mm 150 mm 14,92 kg
Packing units
Type Qty. Length Width Height Weight
Carton 1 660 mm 490 mm 165 mm 16,02 kg
Carton 10 1200 mm 800 mm 1100 mm 170,23 kg
Product pictures
  File size
120,39 KB
  Size
1024 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
125,48 KB
  Size
1024 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
Drawings
  File size
129,18 KB
  Size
744 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
Technical data
Manual
  Name Size
L_134103081.pdf 259,23 KB
L_134103080.pdf 9,41 MB
L_134103144.pdf 639,99 KB
134103082.pdf 1,5 MB
L_135727081.pdf 798,95 KB
Klassifizierung
ETIM 7.0 EC012346
District heating unit
Property Value
Width 746 mm
Model Indirect
Height 645 mm
Depth 140 mm
Suitable for CH/tap water
Connection feed/return heating Internal thread
Connection supply Internal thread
Connection return Internal thread
With adapter for heat meter
With heat meter
Tap water power 36 kW
Adjustment range hot water temperature 40 - 70
Nominal internal diameter hot tap water 3/4 inch (20)
Nominal inner diameter cold tap water 3/4 inch (20)
Tap capacity at 60°C, continuous 15 l/min
Max. operating pressure 1000 kPa
Exchanger with dual separation
Cold tap water connection Internal thread
Hot tap water connection Internal thread
Nominal inner diameter heating 3/4 inch (20)
Nominal inner diameter of supply 3/4 inch (20)
Nominal inner diameter return 3/4 inch (20)