Dwelling station "Regudis W-TU"
12 l/min., heat exchanger copper brazed, without heating circuit


OVENTROP-"Regudis W-TU" Dwelling station Hot potable water performance range 12 l/min.

For the supply of hot potable water to individual dwellings without using auxiliary energy. Station completely pre-assembled on a base plate, leakage and function tested at works.

Model without heating circuit, derivative temperature control set pre-assembled, 5 ball valves included.

Consisting of:

-Copper brazed stainless steel heat exchanger, vertically installed, which reduces the risk of calcification
-Proportional flow controller with potable water priority funtion and integrated cold water throttling disc (the components of the potable water are coated)
-Thermostatic temperature controller with quick- acting sensor for the control of the hot water outlet temperature
-Spacer for heat meter installation 110 mm, G ¾ with reducer for sensor connection G ½ for use of direct immersion sensors
-Cold water dwelling connection with spacer for water meter 110 mm, G ¾ to meter the total water consumption of a dwelling
-Valve for zone control which can be equipped with an actuator
-Differential pressure regulator in the heating water return for differential pressure regulation during quickly alternating operational conditions when drawing off hot water
-Complete piping of the station made of stainless steel, 18 x1

Min. cold water pressure: without flow limiter: 2.0 bar
                                       with flow limiter: 2.5 bar
Min. differential pressure supply: 300 mbar
Draw off temperature tdraw off: 40 °C up to 70 °C
Min. flow temperature: tdraw off + 15 K

max. operating pressure: 10 bar
max. operating temperature: 90 °C
draw off
capacity: 17

Item no.: 1341257
EAN: 4026755400564
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical modifications without notice.
Dimensions of article
Length Width Height Weight
645 mm 477 mm 150 mm 15,85 kg
Packing units
Type Qty. Length Width Height Weight
Carton 1 690 mm 510 mm 180 mm 16,98 kg
Europallet 10 1200 mm 800 mm 1000 mm 214,03 kg
Product pictures
  File size
90,98 KB
  Size
1024 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
100,47 KB
  Size
1024 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
106,1 KB
  Size
1024 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
Drawings
  File size
128,79 KB
  Size
744 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
Manual
  Name Size
L_134119180.pdf 4,07 MB
L_134103081.pdf 259,23 KB
134125781.pdf 1,74 MB
L_134103080.pdf 9,41 MB
L_134103144.pdf 639,99 KB
134103082.pdf 1,5 MB
L_135727081.pdf 798,95 KB
Klassifizierung
ETIM 7.0 EC012346
District heating unit
Property Value
Width 476 mm
Model Indirect
Height 645 mm
Depth 140 mm
Suitable for Tap water
Connection feed/return heating Internal thread
Connection supply Internal thread
Connection return Internal thread
With adapter for heat meter
With heat meter
Tap water power 42 kW
Adjustment range hot water temperature 40 - 70
Nominal internal diameter hot tap water 3/4 inch (20)
Nominal inner diameter cold tap water 3/4 inch (20)
Tap capacity at 60°C, continuous 17 l/min
Max. operating pressure 1000 kPa
Exchanger with dual separation
Cold tap water connection Internal thread
Hot tap water connection Internal thread
Nominal inner diameter heating 3/4 inch (20)
Nominal inner diameter of supply 3/4 inch (20)
Nominal inner diameter return 3/4 inch (20)