Dwelling station "Regudis W-HTO"
15 l/min., heat exchanger nickel brazed, supply connections from the top


OVENTROP-"Regudis W-HT" Dwelling station Hot potable water performance range - 15 l/min.

For the supply of heat and potable water to individual dwellings without using auxiliary energy. Station completely pre-assembled on a base plate, leakage and function tested at works.

Model with supply connections from the top, strainer in the potable water inlet, without cold water outlet dwelling, without spacer for water meter, with integrated double nipple for the installation of the derivative temperature control set, 6 ball valves included.

Consisting of:

-Nickel brazed stainless steel heat exchanger, vertically installed, which reduces the risk of calcification
-Proportional flow controller with potable water priority function and integrated cold water throttling disc (the components of the potable water circuit are coated)
-Thermostatic temperature controller with quick- acting sensor for the control of the hot water outlet temperature
-Spacer for heat meter installation 110 mm, G ¾ with reducer for sensor connection G ½ for use of direct immersion sensors
-Valve for zone control which can be equipped with an actuator
-Facility for the deaeration and draining of the heating circuit
-Differential pressure regulator in the primary return for differential pressure regulation during quickly alternating operational conditions when drawing off hot water
-Strainer in the primary supply and heating circuit return
-Complete piping of the station made of stainless steel, 18 x1

Min. cold water pressure: without flow limiter: 2.0 bar
                                       with flow limiter: 2.5 bar
Min. differential pressure supply: 300 mbar
Draw off temperature tdraw off: 40 °C up to 70 °C
Min. flow temperature: tdraw off + 15 K

max. operating pressure: 10 bar
max. operating temperature: 90 °C
draw off
capacity: 15

Item no.: 1341271
EAN: 4026755399981
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical modifications without notice.
Dimensions of article
Length Width Height Weight
685 mm 515 mm 185 mm 17,89 kg
Packing units
Type Qty. Length Width Height Weight
Carton 1 685 mm 515 mm 185 mm 19,02 kg
Europallet 10 1200 mm 800 mm 1450 mm 207,9 kg
Product pictures
  File size
91,3 KB
  Size
1024 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
93,34 KB
  Size
1024 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
Drawings
  File size
133,72 KB
  Size
678 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
Manual
  Name Size
L_134103081.pdf 259,23 KB
L_134103080.pdf 9,41 MB
L_134103144.pdf 639,99 KB
134103082.pdf 1,5 MB
L_135727081.pdf 798,95 KB
Technical data
Klassifizierung
ETIM 7.0 EC012346
District heating unit
Property Value
Width 476 mm
Model Indirect
Height 645 mm
Depth 140 mm
Suitable for CH/tap water
Connection feed/return heating Internal thread
Connection supply Internal thread
Connection return Internal thread
With adapter for heat meter
With heat meter
Tap water power 36 kW
Adjustment range hot water temperature 40 - 70
Nominal internal diameter hot tap water 3/4 inch (20)
Nominal inner diameter cold tap water 3/4 inch (20)
Tap capacity at 60°C, continuous 15 l/min
Max. operating pressure 1000 kPa
Exchanger with dual separation
Cold tap water connection Internal thread
Hot tap water connection Internal thread
Nominal inner diameter heating 3/4 inch (20)
Nominal inner diameter of supply 3/4 inch (20)
Nominal inner diameter return 3/4 inch (20)