Ball valve for potable water "Optibal TW" with extended plastic handle
Ø 22 mm, both ports press fittings, bronze


OVENTROP-"Optibal TW" Ball valve for potable water

full flow according to EN 13828, both ports bronze press fittings system Sanha®, with extended plastic handle, with plugged draining orifice G ¼ on both sides.

Bronze body, ball made of chrome plated brass, without dead zone, ball always surrounded by water.

Press connection: For direct connection of copper pipes according to DIN EN 1057 / DVGW GW 392, stainless steel pipes according to DIN EN 10088 / DVGW GW 541. Pressing must be carried out to tighten the connection. Only use press jaws with the original contours SANHA (SA), Geberit-Mapress (MM) or Viega (Profipress) in corresponding size. Processing must be carried out according to the installation instructions.

Sound absorbing according to DIN EN ISO 3822 product group I.

DVGW and VA certified.

Material: Bronze

max. operating pressure: 10 bar
max. operating temperature: 90 °C

Item no.: 4208854
EAN: 4026755345018
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical modifications without notice.
Dimensions of article
Length Width Height Weight
129 mm 95 mm 68 mm 0,65 kg
Packing units
Type Qty. Length Width Height Weight
Carton 1 129 mm 95 mm 68 mm 0,65 kg
Carton 10 295 mm 285 mm 115 mm 6,8 kg

Notice for CAD viewer

In order to open the CAD-Viewer and Download CAD-Data please onetime download and install the CAD-App.

Product pictures
  File size
65,25 KB
  Size
1024 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
70,89 KB
  Size
1024 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
Drawings
  File size
60,31 KB
  Size
1024 px x 767 px
  Properties
  •  Clear product picture
  •  Cutout
Download
Technical data
Manual
  Name Size
106015180.pdf 176,53 KB
Declaration of conformity
Klassifizierung
ETIM 7.0 EC011343
Ball valve
Property Value
Model Straight
Surface protection Untreated
Connection 1 Press sleeve
Connection 2 Press sleeve
Material quality Bronze (Rg 5)
Operation Lever handle
Article compression class PN 10
Max. medium temperature (continuous) 90 °C
Nominal inner diameter of connection 2 DN 20
KIWA certified
Permitted by NCP
Min. medium temperature (continuous) 0 °C
Outer pipe diameter connection 1 22 mm
Outer pipe diameter connection 2 22 mm
Flange compression class PN 10
Angle of the valve 0 °
Housing construction 2-part
Full bore
Handle height 75 mm
Handgrip length 80 mm
With connection 1 coupling
With connection 2 coupling
FM quality mark
VdS quality mark
UL quality mark
ULC quality mark
LPCB quality mark
Fire-safe
DVGW quality mark
Housing material Bronze
Spindle material Bronze
Medically clean
Nominal inner diameter connection 1 DN 20
Grease-free
Material ball seal Polytetrafluoroethylene (PTFE)
Material ball Brass
Primary spindle seal material Ethylene-propylene diene monomer rubber (EPDM)
Secondary spindle seal material Ethylene-propylene diene monomer rubber (EPDM)