Logo Oventrop GmbH & Co. KG

Hydromat DTR Differential pressure control valve with flanges PN 16 with hole circles according to ANSI class 150
DN 150 - 6, nominal value 400-1800 mbar, cast iron


Hydromat DFC differential pressure control valve PN 16

For use in central heating and cooling systems with closed circuits, for operation with non- aggressive fluids (e.g. water or suitable water-glycol mixtures according to VDI 2035).

Oventrop differential pressure control valves are proportional regulators working without auxiliary energy. They are used in old an new buildings for decentralised or centralised differential pressure control. If the differential pressure in the system increases, the valve plug moves to the closed position and thus keeps the desired differential pressure constant according to a necessary proportional band. The differential pressure is controlled to the desired nominal value. The nominal value is infinitely adjustable and blockable. The differential pressure control valves are intended for installation in the return pipe.

All functions accessible from the top.

Further additional functions: Shutoff, filling and draining

The control valves are supplied complete with connection set (length of capillary tube: 1 m).

Body made of cast iron, bonnet made of bronze, spindle made of brass resistant to dezincification (DZR), plug made of stainless steel with EPDM seal. Maintenance-free spindel sealing by double EPDM O-ring.

Nominal value: 400 to 1,800 mbar, infinitely adjustable

Both sides with flanges with hole circles according to ANSI class 150. Lengths according to DIN EN 558, basic series 1.
No longer produced
Art.No.: 1064955
EAN: 4026755407990
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical changes.

Dimensions

Dimensions of article

Length Width Height Weight
480 mm 285 mm 580 mm 72 kg

Packing units

Type Qty. Length Width Height Weight
Carton 1 550 mm 305 mm 645 mm 74 kg

Images

Product images

  File size
928,64 KB
  Size
2880 px x 3064 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
1,04 MB
  Size
2880 px x 3064 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Drawings

  File size
53,37 KB
  Size
595 px x 761 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Documents

ETIM

Klassifizierung
ETIM 7.0
Property Value
Height 655 mm
Lockable
Surface protection Other
Connection 1 Flange
Connection 2 Flange
Material quality Cast iron GG 25 (GJL-250)
Operation Hand wheel
Adjustment range 40 - 180
Article compression class PN 16
Max. medium temperature (continuous) 120 °C
Min. medium temperature (continuous) -10 °C
With drain
Flange compression class PN 16
Spindle angle 60 °
Position indicator
Measuring connection Adapter
With impulse pipe
Membrane-controlled
Adjustable pressure difference
With connection 1 coupling
With connection 2 coupling
With volume supply limiter
Housing material Cast iron
Kvs value 170
Nominal inner diameter DN 150