Regudis W-HTO Duo dwelling station
Nominal draw-off quantity: 17 l/min

For the supply of a dwelling with heating water and potable water. Product assembly completely mounted on a base plate. The station is tested for tightness and function.

Version with heating circuit separation system. With additional heat exchanger separating the heating circuit from the primary circuit.

Potable water and supply connections from the top.
Without cold water outlet dwelling and spacer for water meter.
Derivative temperature control cannot be integrated.

Consisting of:

- Copper brazed stainless steel heat exchanger, vertically installed to reduce the risk of calcification
- Proportional flow controller with potable water priority circuit and built-in cold water throttle disc, components of the potable water circuit coated
- Thermostatic temperature controller with fast-response sensor for controlling the hot water outlet temperature
- Spacer for installation of a heat meter 110 mm, G ¾, with reducer for sensor connection G ½ for the use of directly immersed sensors
- Zone valve for volume flow adjustment of the dwelling heating with the option of mounting an optional actuator
- Venting and draining option of the heating circuit
- Differential pressure control valve in the primary return for maintaining the differential pressure during rapid load changes when tapping hot water
- Strainer in the primary supply and in the heating circuit return
- 6 union nuts G ¾, flat sealing, for connecting the station to the supply pipes and to the heating circuit and potable water circuit of the dwelling
- All pipelines made of stainless steel, 18 x 1

Min. cold water pressure: 2.5 bar
Min. differential pressure supply: 300 mbar
Draw-off temperature: t_draw-off = 45 °C - 60 °C
Min. flow temperature: t_draw-off + 15 K