Logo Oventrop GmbH & Co. KG

Regumaq XZ-30 Fresh water station
with Regtronic RQ controller, heat exchanger copper brazed


Regumaq XZ-30 fresh water station with Regtronic RQ-B controller

Electronically controlled product assembly with heat exchanger for the hygienic heating of potable water according to the continuous flow principle. The potable water is heated at the moment it is needed: Just in time. For connection to the buffer storage cylinder. Depending on the temperature and the volume flow on the potable water side, the circulation pump on the primary side is speed-controlled.

The plate heat exchanger meets the requirements of the European Pressure Equipment Directive (PED). Due to the turbulent flow guidance, a good self-cleaning effect is achieved and thus contamination is prevented.

The plate heat exchanger can be flushed using the fill and drain cocks integrated in the primary and secondary circuit. The potable water circuit is protected by a 10 bar safety valve. The fittings of the heat exchanger system have flat sealing connections, are ready mounted on a support plate and tested for leaks.

The Regtronic RQ-B controller is fully wired with the internal electrical components and has a data bus (S-bus) for connection to the CS-BS data logger.

- Number of heat exchanger plates: 30
- Discharge capacity: 2 - 45 l/min., depending on the set potable water temperature and the existing buffer storage cylinder temperature
- Connection: G 1 flat sealing for connection to the buffer storage cylinder and potable water circuit, all internal screw connections G 1 flat sealing

Consisting of:

Potable water circuit:
- Wilo ZRS 15/4-3KU circulation pump
- 3 ball valves with thermometer
- Check valve at circulation connection
- Volume flow sensor
- Safety valve 10 bar
- 2 electronic resistance thermometers
- 2 fill and drain cocks

Buffer storage cylinder circuit:
- 2 electronic resistance thermometers
- 2 fill and drain cocks
- Ball valves with and without check valve and thermometer
- Wilo Yonos Para RS 15/7 circulation pump

Controller functions:
- Hot potable water temperature control
- Circulation control (time programmable: thermal or demand-dependent)
- Thermal disinfection
- Reheating
- Alarm function

Dimensions (outer dimensions insulation): width: 500 mm, height: 860 mm, depth: 260 mm
No longer produced
Art.No.: 1381035
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical changes.

Spare parts

Regumat Heat exchanger without connection fitting 20 plates up to 40 KW
Item no. 1351790
Regumat Heat exchanger without connection fitting 30 plates up to 55 KW
Item no. 1351791
Heat exchanger 30 plates up to 55 kW, completely made of stainless steel
Item no. 1381068
Ball valve for Regumaq X-30/XZ-30 fresh water stations, potable water circulation, thermometer red
Item no. 1381088
Check valve for Regumaq XZ-30/X-80 potable water circulation set
Item no. 1381089
High-efficiency pump for Regumaq XZ-30 fresh water station, for secondary circuit, Wilo ZRS 15/4-3 KU
Item no. 1381091
Volume flow sensor for Regumaq X-30XZ-30 fresh water stations with Regtronic PQ controller
Item no. 1381093
Ball valve for Regumaq X-30/XZ-30 fresh water stations, primary circuit return, thermometer blue
Item no. 1381094
Ball valve for Regumaq X-30/XZ-30 fresh water stations, primary circuit supply, thermometer red
Item no. 1381095
Ball valve for Regumaq X-30/XZ-30 fresh water stations, potable water hot, with fill and drain cock, thermometer red
Item no. 1381096
Ball valve for Regumaq X-30/XZ-30 fresh water stations, potable water cold, thermometer blue
Item no. 1381097
High-efficiency pump 130 mm with connection thread G 1
Item no. 1389010
Temperature sensor for Regumaq X-30/XZ-30 fresh water stations with Regtronic PQ controller, potable water hot, screw-in sensor PT 1000
Item no. 1389050
Temperature sensor for Regumaq X-30/XZ-30 fresh water stations with Regtronic PQ controller, potable water cold, sensor attached to the pipe PT 1000
Item no. 1389051
Temperature sensor for Regumaq X-30/XZ-30 fresh water stations with Regtronic RQ controller, potable water hot, screw-in sensor PT 1000
Item no. 1389052
Regtronic RQ Controller for Regumaq X-30/XZ-30 fresh water stations
Item no. 1389099
Volume flow sensor for Regumaq X-30/XZ-30 fresh water stations with Regtonic RQ, with housing
Item no. 1389901
Volume flow sensor for Regumaq X-30/XZ-30 fresh water stations with Regtronic RQ, without housing
Item no. 1389902

Dimensions

Dimensions of article

Length Width Height Weight
260 mm 500 mm 860 mm 26,08 kg

Packing units

Type Qty. Length Width Height Weight

Images

Product images

  File size
3,15 MB
  Size
5665 px x 5665 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
3,18 MB
  Size
5665 px x 5665 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Drawings

  File size
55,12 KB
  Size
596 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
10,71 KB
  Size
425 px x 425 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Dimensional drawings

  File size
30,86 KB
  Size
1155 px x 809 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Documents

Manual

  Name Size

3,08 MB

ETIM

Klassifizierung
ETIM 7.0
Property Value
Width 500 mm
Height 860 mm
Depth 260 mm
Material quality Stainless steel 316 (1.4401)
Connection supply External thread
Connection return External thread
Max. temperature 95 °C
Nominal internal diameter hot tap water 1 inch (25)
Nominal inner diameter cold tap water 1 inch (25)
Max. operating pressure 1000 bar
Exchanger material Stainless steel
Cold tap water connection External thread
Hot tap water connection External thread
Nominal inner diameter of supply 1 inch (25)
Nominal inner diameter return 1 inch (25)