Logo Oventrop GmbH & Co. KG

Infill panel for Cofloor drywall system
1000 x 500 mm, thickness = 25 mm, made of EPS, thermal conductivity group 035, load 60 kN/m²


The Cofloor drywall system consists of drywall elements and matching heat/cooling conducting lamellas. The drywall basic element consists of 25 mm thick foamed PS (polystyrene). It is a thermal insulation and at the same time a support element for the individual heat/cooling conducting lamellas and bends. The special arrangement of the grooves in the basic elements allows both a meandering and a bifilar (spiral) installation of the Oventrop Copipe HSC multi-layer composite pipe 14 x 2 mm.

We recommend the installation of the Copipe HSC multi-layer composite pipe due to its lower expansion coefficient during heating operation compared to the Copex PE-Xc and Copert PE-RT plastic pipes. The heat/cooling conducting lamellas are made of 0.4 mm thick and the heat/cooling conducting bends of 0.5 mm thick galvanised sheet steel and enable optimum heat/cooling transport into the drywall elements or into the cement or liquid screed. The practicable predetermined breaking points on the heat/cooling conducting lamellas (sheet length 998 mm) enable optimal laying of the pipes in the rooms.

The installation of the Cofloor drywall system is without waste, the execution of the complete installation is possible by only one person. Especially suitable for standard-compliant cement or liquid screed, but also for dry screed elements (e.g. Fermacell panels).
No longer produced
Art.No.: 1402857
EAN: 4026755306651
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical changes.

Dimensions

Dimensions of article

Length Width Height Weight
1000 mm 501 mm 25 mm 0,4 kg

Packing units

Type Qty. Length Width Height Weight
Carton 1 1000 mm 501 mm 25 mm 0,4 kg
Carton 19 1000 mm 501 mm 475 mm 7,6 kg

Images

Product images

  File size
397,87 KB
  Size
5729 px x 3819 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Drawings

  File size
9,46 KB
  Size
440 px x 265 px
  Properties
  •  Clear product picture
  •  Cutout
Download

ETIM

Klassifizierung
ETIM 7.0
Property Value
Width 500 mm
Length 1 mm
Material Polystyrene
Insulation thickness 25 mm
Max. load 20394 kN/m²
Studded panel
Tacker plate
Inlay plate
With foil