Logo Oventrop GmbH & Co. KG

Regucor WHS Energy storage centre
type 800, heat exchanger copper brazed


Regucor WHS energy storage centre

Modular system for the solar-supported supply of heating and hot water to detached and semi-detached houses. The storage cylinder and the add-on groups are functionally and thermo-dynamically matched to each other. With integrated piping and ready-to-plus-in wiring. For combination with conventional (e.g. gas/oil) and regenerative heat generators (e.g. heat pump/solid fuel) in existing and new buildings.

Consisting of:

Solar buffer storage cylinder:
System storage cylinder type 800
Nominal content: 770 litres
Total height (without thermal insulation): 1775 mm
Diameter (without thermal insulation): 790 mm
Max. tipping height (without thermal insulation): 1810 mm
Connections: 8 x G 1½ IT
Max. operating pressure ps: 3 bar (coil 10 bar)
Operating temperature: ts: 95 °C (coil 110 °C)
With removable 140 mm fleece insulation and integrated temperature stratification unit. Connections and mounting positions matched to the Regucor WHS add-on units.

Solar add-on unit:
Regusol L-130 DN 20 with Wilo TEC 15/7 PWM criculation pump, flow meter 2-15 l/min, safety group for pipeline installation 6 bar, connections G ¾ ET according to DIN V 3838

Fresh water add-on unit:
Regumaq XH DN 20 hydraulically controlled product assembly with heat exchanger for hygienic hot potable water preparation according to the continuous flow principle.
Recommended discharge capacity: 15-20 l/min, depending on the set potable water temperature and the existing buffer storage cylinder temperature
Connections: G ¾ ET, flat sealing
With Wilo Yonos Para RS 15/7 high-efficiency pump, temperature controller 40 - 70 °C and copper brazed heat exchanger made of stainless steel.

Heating circuit add-on unit:
Regumat M3-130 DN 20
For weather-compensated flow temperature control.
Connections: G 1 ET, flat sealing
With Wilo Stratos PICO 15/1-6 pump, three-way mixing valve and actuator.

Multifunctional system controller:
Regtronic RS for controlling the Regucor energy storage centre and other components. Up to 12 free inputs and up to 9 free semi-solid state relay outputs. S-bus for connection to the DynaTemp CS-BS data logger. SC card slot for data recording.
No longer produced
Art.No.: 1383550
EAN: 4026755401813
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical changes.

Dimensions

Dimensions of article

Length Width Height Weight
1070 mm 790 mm 1880 mm 222,5 kg

Packing units

Type Qty. Length Width Height Weight
Carton 1 1600 mm 1200 mm 2020 mm 255 kg

BIM/CAD

Notice for CAD viewer

In order to open the CAD-Viewer and Download CAD-Data please onetime download and install the CAD-App.

Images

Product images

  File size
1,98 MB
  Size
5551 px x 5567 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
2,76 MB
  Size
5551 px x 5567 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
1,99 MB
  Size
5551 px x 5567 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
2,79 MB
  Size
5551 px x 5567 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Drawings

  File size
55,99 KB
  Size
598 px x 1212 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Documents

Brochure

  Name Size
more languages 3,32 MB
more languages 7,93 MB