Name: Station for hot water preparation "Regumaq X-30" with "Regtronic RQ", stainless steel heat exchanger
Brand: OVENTROP

Station for hot water preparation "Regumaq X-30"
with "Regtronic RQ", stainless steel heat exchanger

OVENTROP-Station for hot water preparation "Regumaq X-30-B" (fresh water station)

Electronically controlled product assembly with heat exchanger for the hygienic heating of potable water on the flow principle. The potable water is only heated when it is needed ,e.g "just in time". For connection to buffer storage cylinders. Depending on the temperature and the flow volume on the potable water side, the circulation pipe on the heating side is speed regulated.

The plate heat exchanger complies with the specifications of the European Pressure Equipment Directive (PED). Due to the turbulent flow, a good self-cleaning effect avoiding a contamination is achieved.

The plate heat exchanger can be flushed using the fill and drain cocks integrated in the primary and secondary circuit. The potable water circuit is protected by a 10 bar safety valve. The components of the heat exchanger system have flat sealing connections, are pre-assembled on a mounting board and leak tested.

The controller "Regtronic RQ-B" is wired up with the internal electric components and features a data bus (S-bus) for the connection to the data logger "CS-BS".

-Heat exchanger: 30 plates -Discharge capacity: 20-45 l/min., depending on the set potable water temperature and the existing buffer water temperature -Connections: G 1 flat sealing for the connection to the buffer and potable water circuit

Potable water circuit: -2 ball valves with thermometer -Volume flow sensor -Safety valve 10 bar -2 electronic resistance thermometers -2 fill and drain cocks

Buffer circuit: -2 electronic resistance thermometers -2 fill and drain cocks -Ball valves with and without check valve and thermometer -Circulation pump Wilo-Yonos PARA RS 15/7

Controller functions: -Control of the hot potable water temperature -Control of circulation (programmable: thermal or depending on demand) -Thermal disinfection -After-heating -Alarm function

Dimensions (outer dimensions of insulation): Width: 500 mm, Height: 860 mm, Depth: 260 mm

max. operating pressure: 10 bar
max. operating temperature: 95 °C

Item no.: 1381032
EAN: 4026755400885
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical modifications without notice.

Download GAEB Download tender text

Accessories

Retaining and fixing set for "Regumaq X/XZ"
Item no. 1389090

Storage cylinder connection set for "Regumaq X/XZ"
Item no. 1381185

Dimensions of article

Length	Width	Height	Weight
860 mm	265 mm	500 mm	25 kg

Packing units

Type	Qty.	Length	Width	Height	Weight
Carton	1	900 mm	310 mm	535 mm	27 kg
One-way pallet	3	1200 mm	800 mm	1050 mm	92 kg

Oventrop „Regumaq“ (english)

Oventrop „Regumaq“ station for hot water preparation

Product pictures

	File size 120 KB Size 1024 px x 1024 px Properties Clear product picture Cutout Download
	File size 138,76 KB Size 1024 px x 1024 px Properties Clear product picture Cutout Download
	File size 121,99 KB Size 1024 px x 1024 px Properties Clear product picture Cutout Download
	File size 139,58 KB Size 1024 px x 1024 px Properties Clear product picture Cutout Download

Drawings

	File size 64,9 KB Size 596 px x 1024 px Properties Clear product picture Cutout Download

Technical data

	Name	Size
	“Regumaq X-30” / “Regumaq XZ-30” Fresh water stations	2,54 MB

Manual

	Name	Size
	138106082.pdf	1,49 MB
	134103144.pdf	148,17 KB
	138103080.pdf	6,66 MB
	138103082.pdf	3,08 MB
	135727081.pdf	798,95 KB

Station for hot water preparation "Regumaq X-30"
with "Regtronic RQ", stainless steel heat exchanger