Actuators

Electrothermal and electromotive actuators are used for heating, ventilation and air conditioning. The actuators can be used for room temperature control or as zone valves.
Oventrop offers actuators in the variants “normally closed” and “normally open”.
All electrothermal actuators are protected against overvoltage, a varistor is not required.

Oventrop offers electromotive actuators with and without communication interfaces.

Actuators

Aktor T 2P Electrothermal actuator, two point control 230 V AC, normally closed, M 30 x 1.5 Art. No. 1012415

Aktor T 2P Electrothermal actuator, two point control 24 V AC / DC, normally closed, M 30 x 1.5 Art. No. 1012416

Aktor T 2P Electrothermal actuator, two point control 230 V AC, normally open, M 30 x 1.5 Art. No. 1012425

Aktor T 2P Electrothermal actuator, two point control 24 V AC / DC, normally open, M 30 x 1.5 Art. No. 1012426

Aktor T 2P Electrothermal actuator, two point control 230 V AC, normally closed with integrated auxiliary switch, M 30 x 1.5 Art. No. 1012435

Aktor T 2P Electrothermal actuator, two point control 24 V AC / DC, normally closed, M 30 x 1.5, cable length 2 m Art. No. 1012442

Aktor T 2P Electrothermal actuator, two point control 230 V AC, normally closed, M 30 x 1.5, cable length 5 m Art. No. 1012455

Aktor T 2P Electrothermal actuator, two point control 230 V AC, normally closed, M 30 x 1.5, cable length 10 m Art. No. 1012459

Aktor T ST Electrothermal actuator, 0 - 10 V control, connection thread M 30 x 1.5 24 V AC, normally closed Art. No. 1012953