Logo Oventrop GmbH & Co. KG

Six-way ball valve Optibal W6
PN 16, DN 15, External thread with Eurocone, Kvs: 3.2


Six-way ball valve for combined heating and cooling systems. For switching between heating and cooling mode in four-pipe systems, for example heating/cooling ceilings or fan coil units. 
The Optibal W6 consists of two three-way ball valves arranged one above the other, which are connected to each other via a common rotary axis. It takes over the tasks of up to four straight valves. This way, not only the space required but also the material and installation costs can be reduced. 
In the rotation angle between heating and cooling position there is a closing zone to ensure complete separation of the heating and cooling circuits. Markings at the end of the spindle make the position visible even when the actuator is removed.
Mounting: M5 threaded hole on the underside of the fitting.

Nominal size: DN 15
Connection size: G ¾ external thread with Eurocone according to EN 16313, centre distance 50 mm

Technical data:
- Operating temperature : 0 °C to 90 °C
- Pressure rating: PN 16
- Differential pressure: max. 2 bar
- Flow characteristic line: linear

Kvs values:
- Heating mode: 3.2
- Cooling mode: 3.2
Reduced Kvs values with orifices, item no. 1132020 (accessory)
- Heating mode: optionally 2.5 / 1.6 / 1.0 / 0.63 / 0.4 or 0.25
- Cooling mode: optionally 2.5 / 1.6 / 1.0 / 0.63 / 0.4 or 0.25
Kvs orifices can only be installed in the correct position and thus ensure a quasi-linear characteristic line.

Actuator and control
For use with Oventrop Aktor R ST L rotary actuator, item no. 1132030 (accessory)
- Connection: M 40 x 1.5
Control via 0 - 10 V control signal
- Cooling mode: 0 - 4 V
- Closing zone: 4 - 6 V
- Heating mode: 6 - 10 V
Control via on/off control signal
- Cooling mode: 0 V
- Heating mode: 10 V or 24 V

Material
- Body: dezincification resistant brass, raw
- Ball: bronze, smooth turned
- Spindle: bronze
- Spindle seal: EPDM O-ring
- Ball seat: PTFE / EPDM seal
Art.No.: 1132004
EAN: 4026755440782
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical changes.

Dimensions

Dimensions of article

Length Width Height Weight
116 mm 85 mm 85 mm 1,26 kg

Packing units

Type Qty. Length Width Height Weight
Carton 1 190 mm 120 mm 100 mm 1,33 kg

BIM/CAD

Download CAD-Formats
Format Size Download
Revit 508 KB
Download
DWG (3D) 120,33 KB
Download
DWG 30,87 KB
Download
DXF (3D) 857,4 KB
Download
DXF 143,29 KB
Download
STEP 200,95 KB
Download
OBJ / MTL 78,05 KB
Download

Notice for CAD viewer

In order to open the CAD-Viewer and Download CAD-Data please onetime download and install the CAD-App.

Images

Product images

  File size
353,61 KB
  Size
1726 px x 2398 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
410,76 KB
  Size
3840 px x 3840 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
498,11 KB
  Size
3484 px x 3484 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
505,69 KB
  Size
3840 px x 3840 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
394,31 KB
  Size
4126 px x 4126 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
497,44 KB
  Size
4126 px x 4126 px
  Properties
  •  Clear product picture
  •  Cutout
Download

ETIM

Klassifizierung
ETIM 7.0
Property Value
Surface protection Untreated
Number of mounting holes 1
Kvs value 1 3.2
Kvs value 2 3.2
Reversing valve
Dead band (all ports closed) 36 - 54
Article compression class PN 16
Max. medium temperature (continuous) 90 °C
Min. medium temperature (continuous) 0 °C
Shaft height 98.5 mm
Built-in pressure relief valve
Housing material Brass
Connections External thread
Nominal inner diameter 3/4 inch (20)
Max. pressure difference in opened position 2 kPa
Ground characteristic Linear
With ISO 5211 Direct Mount top flange