Energy storage centre "Regucor WHS"
type 800, nickel brazed stainless steel heat exchanger


OVENTROP-Energy storage centre "Regucor WHS"

Modular system for solar-assisted supply of detached and semi-detached houses with heat and hot water. Storage cylinder and add-on groups coordinated functionally and thermodynamically, with integrated piping and plug-in cabling. For combination with classic (e.g. gas/oil) and regenerative heat generators (e.g. heat pump/solid fuel) in existing and new buildings.

Consisting of:

Buffer storage cylinder: System storage cylinder type 800, nominal content 770 litres Total height (without insulation): 1775 mm Diameter (without insulation): 790 mm Max. pivot height (without insulation): 1810 mm Connections: 8 x G 1½ female thread Max. operating pressure ps: 3 bar (coil 10 bar) Operating temperature ts: 95 °C (coil 110 °C) With removable 140 mm fleece insulation and integrated temperature layer unit. Connections and fixing positions coordinated with "Regucor WHS" storage cylinder add-on groups.

Add-on group Solar: "Regusol L-130" DN 20 with circulation pump Wilo TEC ST 15/7 PWM, flow measuring device 2-15 l/min., with safety group for riser installation 6 bar, connections G ¾ male thread according to DIN EN 16313 (cone "Euro")

Add-on group fresh water: "Regumaq XH" DN 20 Hydraulically controlled heat exchanger system for the hygienic heating of potable water on the flow principle. Recommended discharge capacity: 15-20 l/min., depending on the set potable water temperature and the existing buffer water temperature. Connections G ¾ male thread flat sealing, with high-efficiency pump Wilo-Yonos PARA RS 15-7 PWM2, temperature controller 40 °C - 70 °C, nickel brazed stainless steel heat exchanger.

Add-on group heating circuit: "Regumat M3-130" DN 20 For weather guided flow temperature control. Connections G 1 male thread, flat sealing. High-efficiency pump Wilo-Stratos PICO 15/1-6, with three-way mixing valve and actuator.

Multifunctional system controller: "Regtronic RS" for the control of the energy storage centre "Regucor WHS" and further installation components. Up to 13 free inputs and up to 9 free solid-state relay outputs. S-bus for the connection to the data logger "CS-BS", SD-card slot for data recording.

Item no.: 1383562
EAN: 4026755394917
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical modifications without notice.
Dimensions of article
Length Width Height Weight
1600 mm 1200 mm 1870 mm 232 kg
Packing units
Type Qty. Length Width Height Weight
Carton 1 1600 mm 1200 mm 2010 mm 252 kg

We are sorry...

but the CAD viewer which is normally displayed here is not compatible with your browser. We are currently working on a solution supporting all standard browsers. We should like to ask you to use Internet explorer until a new CAD viewer will be available.

Product pictures
  File size
74,4 KB
  Size
1021 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
75,7 KB
  Size
1021 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
77,62 KB
  Size
1021 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
78,99 KB
  Size
1021 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
Drawings
  File size
49,46 KB
  Size
505 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
Technical data
Manual
  Name Size
138356584.pdf 1011 KB
138355080.pdf 20,99 MB
138355081.pdf 9,54 MB
138356582.pdf 6,45 MB
135727081.pdf 538,27 KB
ErP fiche
  Name Size
E_1383562.pdf 146,55 KB