MyOV is your exclusive entrance to the world of Oventrop. From here you have access to our whole range of service offers and much more!
Register now for free within a few minutes!
The Regusol X stations with heat exchanger enable a controlled transfer of thermal energy from a solar circuit (primary circuit) to a storage cylinder circuit (secondary circuit). The stations enable the solar circuit to be shut off on the supply and return side and prevent self-circulation via integrated check valves when the pump is switched off. The integrated electronic controller takes over the control and monitoring of the solar thermal system.The primary circuit consists of a high-efficiency pump, ball valves with integrated check valves and thermometers in the supply and return, a safety group with safety valve, pressure gauge, fill and drain cock and connection possibility of an expansion tank, connections for filling, flushing and draining and an electronic volume flow sensor. The secondary side consists of a high-efficiency pump, ball valves with integrated thermometers in the supply and return, a check valve, a safety valve, a ventvalve and a connection for filling, flushing and draining. Depending on the version, a changeover valve is also included, e.g. for stratified storage cylinders or two separate storage cylinders. The circuits are separated by a plate heat exchanger. The station has an integrated electronic controller, a wall mounting device and a thermal insulation.The Regusol X stations are ideal for buffer storage cylinders without direct solar connection. They are characterised by a time- and space-saving installation. A high degree of functional reliability is ensured by maintenance-free components and high-quality materials.