Logo Oventrop GmbH & Co. KG

Hot cutting device for Cofloor drywall system
for cutting individual pipe guidesin the infill panel


The Cofloor drywall system consists of drywall elements and matching heat/cooling conducting lamellas. The drywall basic element consists of 25 mm thick foamed PS (polystyrene). It is a thermal insulation and at the same time a support element for the individual heat/cooling conducting lamellas and bends. The special arrangement of the grooves in the basic elements allows both a meandering and a bifilar (spiral) installation of the Oventrop Copipe HSC multi-layer composite pipe 14 x 2 mm.

We recommend the installation of the Copipe HSC multi-layer composite pipe due to its lower expansion coefficient during heating operation compared to the Copex PE-Xc and Copert PE-RT plastic pipes. The heat/cooling conducting lamellas are made of 0.4 mm thick and the heat/cooling conducting bends of 0.5 mm thick galvanised sheet steel and enable optimum heat/cooling transport into the drywall elements or into the cement or liquid screed. The practicable predetermined breaking points on the heat/cooling conducting lamellas (sheet length 998 mm) enable optimal laying of the pipes in the rooms.

The installation of the Cofloor drywall system is without waste, the execution of the complete installation is possible by only one person. Especially suitable for standard-compliant cement or liquid screed, but also for dry screed elements (e.g. Fermacell panels).
to be discontinued
Art.No.: 1402891
EAN: 4026755306668
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical changes.

Dimensions

Dimensions of article

Length Width Height Weight
235 mm 110 mm 51 mm 1,02 kg

Packing units

Type Qty. Length Width Height Weight
Carton 1 320 mm 127 mm 55 mm 1,27 kg

Images

Product images

  File size
36,11 KB
  Size
584 px x 564 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
88,34 KB
  Size
709 px x 709 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
501,03 KB
  Size
2362 px x 2362 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Drawings

  File size
23,1 KB
  Size
450 px x 390 px
  Properties
  •  Clear product picture
  •  Cutout
Download

ETIM

Klassifizierung
ETIM 7.0
Property Value
Type of accessory/spare part Other