Logo Oventrop GmbH & Co. KG

Regumaq XH Fresh water station
with high-efficiency pump Wilo-Yonos PARA RS 130 15/7 PWM2, heat exchanger made of stainless steel, copper brazed


Regumaq XH fresh water station with Wilo Yonos RS RWM 15/7 pump, heat exchanger copper brazed

Hydronically controlled product assembly with heat exchanger for the hygienic heating of potable water according to the continuous flow principle. The potable water is heated at the moment it is needed: Just in time. Depending on the draw-off quantity on the potable water side, the circulation pump on the primary side is started and the volume flow is controlled. The brazed plate heat exchanger meets the requirements of the European Pressure Equipment Directive (PED). Due to the turbulent flow guidance, a good self-cleaning effect is achieved and thus contamination is prevented.

With Wilo high-efficiency pump Yonos RS RWM 15/7 in the buffer storage cylinder circuit.

Recommended discharge capacity: 15-20 l/min, depending on the set potable water temperature and the existing buffer storage cylinder temperature.

Adjustable potable water temperature: 40 - 60 °C

Connections:
G ¾ flat sealing for connection to the potable water circuit.
G 1 flat sealing for connection to the buffer storage cylinder circuit.

Consisting of:

Potable water circuit:
- Flow controller
- Connection for circulation pipe (G ¾)
- Heat exchanger
- Temperature sensor
- Flow switch

Buffer storage cylinder circuit:
- Storage cylinder pump
- Heat exchanger
- Vent valve
- Flow controller
- Thermostatic valve
No longer produced
Art.No.: 1381042
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical changes.

Dimensions

Dimensions of article

Length Width Height Weight
190 mm 400 mm 690 mm 15,05 kg

Packing units

Type Qty. Length Width Height Weight

Images

Product images

  File size
1,5 MB
  Size
5128 px x 5128 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
1,52 MB
  Size
5128 px x 5128 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Drawings

  File size
123,9 KB
  Size
595 px x 1057 px
  Properties
  •  Clear product picture
  •  Cutout
Download

ETIM

Klassifizierung
ETIM 7.0
Property Value
Width 400 mm
Height 690 mm
Depth 186 mm
Material quality Stainless steel 316 (1.4401)
Connection supply External thread
Connection return External thread
Max. temperature 95 °C
Nominal internal diameter hot tap water 3/4 inch (20)
Nominal inner diameter cold tap water 3/4 inch (20)
Max. operating pressure 600 bar
Exchanger material Stainless steel
Cold tap water connection External thread
Hot tap water connection External thread
Nominal inner diameter of supply 1 inch (25)
Nominal inner diameter return 1 inch (25)