Logo Oventrop GmbH & Co. KG
Download GAEB

Regudis W-HTF Dwelling station GSWB
performance range 2, 15 l/min., heat exchanger copper brazed

Regudis W-HTF dwelling station
Nominal draw-off quantity: 15 l/min, GSWB version

For the supply of a dwelling with heating water and potable water. Product assembly completely mounted on a base plate. The station is tested for tightness and function.

GSWB version wth additional spacer for cold water meter for hot water, no potable water priority circuit. Derivative temperature contol set pre-assembled. Return temperature limiter in the heating circuit.

Consisting of:

- Copper brazed stainless steel heat exchanger, vertically installed to reduce the risk of calcification
- Thermostatic temperature controller with fast-response sensor for controlling the hot water outlet temperature
- Spacer for installation of a heat meter 110 mm, G ¾, with reducer for sensor connection G ½ for the use of directly immersed sensors
- Cold water outlet dwelling with spacer for water meter 110 mm, G ¾, for metering the cold water consumption of the dwelling
- Zone valve for volume flow adjustment of the dwelling heating with the option of mounting an optional actuator
- Venting and draining option of the heating circuit
- Differential pressure control valve in the primary return for maintaining the differential pressure during rapid load changes when tapping hot water
- Strainer in the primary supply and in the heating circuit return
- 7 union nuts G ¾, flat sealing, for connecting the station to the supply pipes and to the heating circuit and potable water circuit of the dwelling
- All pipelines made of stainless steel, 18 x 1

Min. cold water pressure: 2.5 bar
Min. differential pressure supply: 300 mbar
Draw-off temperature: tdraw-off = 45 °C - 60 °C
Min. flow temperature: tdraw-off + 15 K


Size: DN20 - 3/4
Connection: Internal thread
Item no.: 1341121
EAN: 4026755398328
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical changes.
Download GAEB