Logo Oventrop GmbH & Co. KG

Regudis W-HTU Duo Dwelling station with heating circuit separation system
performance range 3, 17 l/min., heat exchanger copper brazed


"Regudis W-HTU Duo" Dwelling station Hot potable water performance range - 17 l/min.

For the supply of heat and potable water to individual dwellings without using auxiliary energy. Station completely pre-assembled on a base plate, leakage and function tested at works.

Model as heating circuit separation system with additional heat exchanger for the separation of the supply system (primary circuit) and the heating circuit of the dwelling (secondary circuit).

Consisting of:

-Copper brazed stainless steel heat exchanger, vertically installed, which reduces the risk of calcification
-Proportional flow controller with potable water priority function and integrated cold water throttling disc (the components of the potable water circuit are coated)
-Thermostatic temperature controller with quick- acting sensor for the control of the hot water outlet temperature
-Spacer for heat meter installation 110 mm, G ¾ with reducer for sensor connection G ½ for use of direct immersion sensors
-Cold water dwelling connection with spacer for water meter 110 mm, G ¾ to meter the total water consumption of a dwelling
-Valve for zone control which can be equipped with an actuator
-Facility for the deaeration and draining of the heating circuit
-Differential pressure regulator in the primary rreturn for differential pressure regulation during quickly alternating operational conditions when drawing off hot water
-Strainer in the primary supply and heating circuit return
-7 flat sealing G ¾ collar nuts for the connection of the station to the supply pipes and the potable water circuit of the dwelling
-Complete piping of the station made of stainless steel, 18 x1

Min. cold water pressure: without flow limiter: 2.0 bar
                                       with flow limiter: 2.5 bar
Min. differential pressure supply: 300 mbar
Draw off temperature tdraw off: 40 °C up to 70 °C
Min. flow temperature: tdraw off + 15 K
Art.No.: 1341332
EAN: 4026755411805
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical changes.

Dimensions

Dimensions of article

Length Width Height Weight
150 mm 630 mm 630 mm 23,57 kg

Packing units

Type Qty. Length Width Height Weight
Carton 1 190 mm 645 mm 680 mm 25,8 kg
Europallet 5 1200 mm 800 mm 1075 mm 151 kg

Images

Product images

  File size
2,09 MB
  Size
4772 px x 4772 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
1,17 MB
  Size
4772 px x 4772 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Drawings

  File size
85,72 KB
  Size
371 px x 470 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Documents

ETIM

Klassifizierung
ETIM 7.0 EC012346
District heating unit
Property Value
Width 630 mm
Model Indirect
Height 645 mm
Depth 150 mm
Suitable for CH/tap water
With adapter for heat meter
With heat meter
Tap water power 42 kW
Adjustment range hot water temperature 40 - 70
Nominal internal diameter hot tap water 3/4 inch (20)
Nominal inner diameter cold tap water 3/4 inch (20)
Tap capacity at 60°C, continuous 17 l/min
Max. operating pressure 1000 kPa
Exchanger with dual separation
Nominal inner diameter heating 3/4 inch (20)
Nominal inner diameter of supply 3/4 inch (20)
Nominal inner diameter return 3/4 inch (20)