High temperature ball valve "Optibal" PN 16 with extended plastic handle
DN 25, both ports press connection 28 mm, brass

OVENTROP-High temperature ball valve "Optibal"

brass, nickel plated, reduced flow

Max. operating pressure ps: 16 bar Max. operating temperature: 120 °C (for short periods up to +150 °C)

Extended plastic handle.

both ports press connection

Material: Brass
Surface: nickel plated

Size: DN 25

max. operating pressure: 16 bar
min. operating temperature: -10 °C
max. operating temperature: 120 °C

Item no.: 1078761
EAN: 4026755344493
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical modifications without notice.
Dimensions of article
Length Width Height Weight
143,4 mm 40,8 mm 98,6 mm 0,73 kg
Packing units
Type Qty. Length Width Height Weight
Carton 1 143,4 mm 40,8 mm 98,6 mm 0,75 kg
Carton 10 330 mm 240 mm 175 mm 7,66 kg
Product pictures
  File size
334,55 KB
2303 px x 1942 px
  •  Clear product picture
  •  Cutout
  File size
21,16 KB
595 px x 437 px
  •  Clear product picture
  •  Cutout
Technical data
  Name Size
L_106015180.pdf 176,53 KB
ETIM 7.0 EC011343
Ball valve
Property Value
Model Straight
Surface protection Nickel-plated
Connection 1 Press sleeve
Connection 2 Press sleeve
Material quality Dezincification resistant brass (DZR)
Operation Lever handle
Article compression class PN 16
Max. medium temperature (continuous) 120 °C
Nominal inner diameter of connection 2 DN 25
KIWA certified
Permitted by NCP
Min. medium temperature (continuous) -10 °C
With drain
Outer pipe diameter connection 1 28 mm
Outer pipe diameter connection 2 28 mm
Flange compression class PN 16
Angle of the valve 90 °
Housing construction 1-part
Full bore
Handle height 79 mm
Handgrip length 80 mm
With connection 1 coupling
With connection 2 coupling
FM quality mark
VdS quality mark
UL quality mark
ULC quality mark
LPCB quality mark
DVGW quality mark
Housing material Brass
Spindle material Brass
With drain possibility (connection)
Medically clean
Nominal inner diameter connection 1 DN 25
Material ball seal Polytetrafluoroethylene (PTFE)
Material ball Brass
Primary spindle seal material Ethylene-propylene diene monomer rubber (EPDM)
Secondary spindle seal material Ethylene-propylene diene monomer rubber (EPDM)