Logo Oventrop GmbH & Co. KG

Flush-mounted circulation valve "Aquastrom UP-Therm"
DN 15, 15 mm press connection, with protection/operating cap, bronze


Flush-mounted circulation valve "Aquastrom UP-Therm"

Thermostatic circulation regulating valve for hydronic balancing of potable water circulation systems with floor to floor distribution.

For potable water installations PN 16, straight pattern valve made of bronze, with flush-mounting pipe and protection/operating cap.

Automatic thermal disinfection. Disinfection range starts about 6 K above the set temperature. The disinfection volume flow returns to the residual volume flow approximately 12 K above the set temperature to guarantee the supply of the succeeding system during thermal disinfection. Minimum residual volume flow kv = 0.05

All compoents in contact with potable water are made of non-brass materials. Without dead zone, non-rising stem, maintenance-free stem seal due to double O-ring made of EPDM.

With insulation shells made of EPS according to the Energy Saving Directive (EnEV). Fire protection class B1.

DVGW certified (PN 10).

Press connection: For direct connection of copper pipes according to DIN EN 1057 / DVGW GW 392, stainless steel pipes according to DIN EN 10088 / DVGW GW 541. Pressing must be carried out to tighten the connection. Only use press jaws with the original contours SANHA (SA), Geberit-Mapress (MM) or Viega (Profipress) in corresponding size. Processing must be carried out according to the installation instructions. Press connection: For direct connection of copper pipes according to DIN EN 1057 / DVGW GW 392, stainless steel pipes according to DIN EN 10088 / DVGW GW 541. Pressing must be carried out to tighten the connection. Only use press jaws with the original contours SANHA (SA), Geberit-Mapress (MM) or Viega (Profipress) in corresponding size. Processing must be carried out according to the installation instructions.

both ports bronze press fittings for the universal connection of pipes for flush-mounting or front of wall installation
Art.No.: 4225152
EAN: 4026755357295
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical changes.

Dimensions

Dimensions of article

Length Width Height Weight
130 mm 66 mm 192 mm 0,62 kg

Packing units

Type Qty. Length Width Height Weight
Carton 1 175 mm 130 mm 195 mm 0,77 kg

CAD

Notice for CAD viewer

In order to open the CAD-Viewer and Download CAD-Data please onetime download and install the CAD-App.

Images

Product images

  File size
593,4 KB
  Size
4139 px x 4139 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Drawings

  File size
29,66 KB
  Size
373 px x 489 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Documents

Manual

  Name Size
L_422000480.pdf 2,85 MB
L_106015180.pdf 176,53 KB

ETIM

Klassifizierung
ETIM 7.0 EC010058
Shut down valve (tap water)
Property Value
Surface protection Untreated
Connection 1 Press sleeve
Connection 2 Press sleeve
Max. medium temperature (continuous) 90 °C
KIWA certified
With drain
Spindle angle 90 °
Operation using hand wheel
Outer pipe diameter connection 15 mm
With connection 1 coupling
With connection 2 coupling
Housing material Bronze
With drain possibility (connection)