Logo Oventrop GmbH & Co. KG

Room thermostats

ClimaCon F Room thermostats for surface heating

The ClimaCon F room thermostats are used to control the temperature of surface heating and cooling systems as well as heating and cooling ceilings in detached houses or dwellings. Depending on the room thermostat, switching between heating and cooling is possible via a change-over signal, e.g. from the heat pump.
The ClimaCon F room thermostats can be used in combination with electrothermal actuators (e.g. Aktor T 2P). Alternatively, connection to a connecting block (e.g. FloorCon) is possible. The simple surface-mounted installation and quick configuration make the product very installer-friendly.
Depending on the model, there are room thermostats with reduced display, with integrated time switch and setting options via app.

Room thermostats heating, flush mounting

The flush-mounted electric room thermostat is required in conjunction with the Aktor T 2P electrothermal actuators (two point) for individual room temperature control.

Heating: Use electrothermal actuators (two point) “normally closed”. Temperature setback possible via external time switch.

Cooling:  Use electrothermal acutators (two point) “normally open”.

Room thermostats heating/cooling

The electronic surface-mounted room thermostat is used in conjunction with electromotive or electrothermal actuators for individual room temperature control in heating and cooling systems. It can also be used in three or four pipe systems and has an adjustable neutral zone between heating and cooling stage. The temperature is set at the room thermostat.

Room thermostats heating/cooling with fan control

Room thermostats for electrical control of fan coil units for demand-oriented heating and cooling. Depending on the room thermostat, fan coil units in two or four pipe systems can be controlled. 
The temperature as well as the fan speed can be set at the room thermostat. Furthermore, various operating modes can be set.

Room thermostats - Accessories

R-Tronic Wireless thermostats

Oventrop offers wireless thermostats with two types of radio communication:
The R-Tronic wireless thermostats with open radio communication according to EnOcean standard can be integrated directly into Smart Home systems.
The R-Tronic wireless thermostats with closed radio communication ( proprietary) are used in stand-alone operation in connection with wireless actuators to control radiators or in connection with a multi-channel wireless receiver to control surface heating systems.

The temperature setting as well as the storage of time programmes is carried out at the wireless thermostat or in the app of the Smart Home System. Depending on the model, an additional measurement of the relative humidity in % and the CO2 concentration in ppm is possible.

Power is supplied by batteries or a power supply unit (100 - 240 V). For the battery-operated models, power supply via the mains is possible as an alternative (see chapter “R-Tronic Accessories”).

For the closed R-Tronic system, the following applies: In battery operation, up to 3 participants can be taught in, in mains operation, up to 8 participants can be taught in. In mains operation it is also possible to teach in wireless actuators, window contacts and a single-channel wireless receiver. The single-channel wireless receiver enables the control of a fan depending on the set CO2 threshold value. For this application a thermostat must be used which can measure the CO2 concentration.