Logo Oventrop GmbH & Co. KG
Download GAEB

Mounting channel
for Unibox, with return shutoff

Mounting channel with shutoff

with cover and thermostat with remote control for Unibox, depth: 57 mm

For solid and lightweight walls, made of galvanised sheet steel for pratical laying of the pipe on the floor and in the wall to the Unibox. For connection without manifolds and room-by-room shutoff of surface heating circuits.

Shutoff consisting of: Shutoff valve, vent and flush valve. Valve connection G ¾ for Oventrop compression fittings.

Assembly without screwing or riveting. Adjustment to the installation height via adjustable extension foot. Adjustment of the installation depth for solid walls via adjustable angles. For lightweight walls, the mounting channel is screwed directly to the profiles. Additional recesses in the rear wall of the mounting channel allow the Unibox to be connected even from the room behind it. The Unibox does not need to be installed in the mounting channel until shortly before the plastering work begins. A special cover for the Unibox is included with the mounting channel. The variable mounting options ensure exact installation of the Unibox. The mounting channel is prepared for the connection of all remote transmitters, remote sensors (mechanical or electrical) by means of connection options (predetermined breaking points).

Height: extendable from 440 mm to 490 mm
Width: 160 mm

Item no.: 1022654
EAN: 4026755401202
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical changes.
Download GAEB