Logo Oventrop GmbH & Co. KG
Download GAEB

Transmission station Regudis H DN 20
with ball valve connection set

Regudis H transmission stations with plate heat exchanger for direct and indirect heat transmission from a local or district heating network to the potable water and heating system of detached and semi-detached houses.  The stations are equipped with an electronic controller for the weather-compensated control of the flow temperature of the heating system and simultaneous limitation of the return temperature to the heat network.

The stations consist of a plate heat exchanger, an electronic controller, a pressure independent control valve with actuator, strainers with fill and drain cock, spacers for heat meters, a safety group with pressure gauge, ball valves and a thermal insulation.

The compact stations are available in two performance classes and different connection configurations. They are characterized by a simple hydronic connection to the local and district heating network. The station is delivered with factory-mounted function modules, completely parameterized and tested.

  • Nominal size: DN 20
  • Function modules: Ball valve connection set DN 20
  • Heat exchanger: Copper brazed
  • Connection heating circuit: G 3/4 external thread
  • Connection heating network: G 1 external thread
  • Length: 295 mm
  • Width: 545 mm
  • Height: 775 mm
  • Thermal insulation: Yes
  • Pressure gauge: Yes
  • Safety valve: Yes
  • Safety group: Yes
  • Spacer for heat meter: Yes
  • Strainer: Yes
  • Venting: Yes
  • Draining: Yes
  • Ball valve: Yes
  • Pressure independent control valve: Yes
  • Electronic controller: Yes
  • Actuator: Yes
  • Temperature sensor: PT 1000
  • Max. primary volume flow: 1300 l/h
  • Max. primary differential pressure: 4 bar
  • Min. operating pressure: 1 bar
  • Max. operating pressure: 10 bar
  • Max. operating temperature: 95 °C

Art.-Nr.: 1391026
EAN: 4026755471748
Hersteller: Oventrop GmbH & Co. KG
Technische Änderungen vorbehalten


Download GAEB