ClimaCon F Room thermostats for surface heating

The ClimaCon F room thermostats are used to control the temperature of surface heating and cooling systems as well as heating and cooling ceilings in detached houses or dwellings. Depending on the room thermostat, switching between heating and cooling is possible via a change-over signal, e.g. from the heat pump.
The ClimaCon F room thermostats can be used in combination with thermal actuators (e.g. Aktor T 2P). Alternatively, connection to a connecting block (e.g. FloorCon) is possible. The simple surface-mounted installation and quick configuration make the product very installer-friendly.
Depending on the model, there are room thermostats with reduced display, with integrated time switch and setting options via app.

Actuators

Thermal and motorised actuators are used for heating, ventilation and air conditioning. The actuators can be used for room temperature control or as zone valves.
Oventrop offers actuators in the variants “normally closed” and “normally open”.
All thermal actuators are protected against overvoltage, a varistor is not required.

R-Tronic System for individual room temperature control

The R-Tronic wireless thermostats with closed radio communication ( proprietary) are used in stand-alone operation in connection with wireless actuators to control radiators or in connection with a multi-channel wireless receiver to control surface heating systems.

The temperature setting as well as the storage of time programmes is carried out at the wireless thermostat. Depending on the model, an additional measurement of the relative humidity in % is possible.

Power is supplied by batteries or a power supply unit (100 - 240 V). For the battery-operated models, power supply via the mains is possible as an alternative.

In battery operation, up to 3 participants can be taught-in, in mains operation, up to 8 participants can be taught-in. In mains operation it is also possible to teach in window contacts.

R-Tronic - Accessories