Logo Oventrop GmbH & Co. KG

Ensemble de robinetterie pour la mise en service
pour raccords Multiblock T-RTL et TQ-RTL


With the commissioning block, the surface heating circuit can already be filled, vented and checked for leaks during the shell construction phase. In addition, limited operation of the surface heating is possible with the fitting.
For this purpose, the flow temperature of the surface heating must be regulated via the boiler control. The specifications for heating of cement and anhydrite screed according to EN 1264-4 must be observed.
The flow temperature is not controlled and limited by the commissioning block, as is does not have a temperature control device.
The positioning and preliminary connection of the radiator (without function) is possible due to identical dimensions of the commissioning block and the Multiblock T-RTL/TQ-RTL connection fitting. However, the radiator cannot be filled and operated via the fitting, as there is no water-carrying connection to the radiator. This avoids additional filling and draining of the radiator before the following installation of the Multiblock T-RTL/TQ-RTL connection fitting.
Réf.: 1184094
EAN: 4026755417623
Fabricant: Oventrop GmbH & Co. KG
Sous réserve de modifications techniques.

Dimensions

Dimensions de l’article

Longueur Largeur Hauteur Poids
215 mm 75 mm 50 mm 0,63 kg

Unités de conditionnement

Type Quantité Longueur Largeur Hauteur Poids
Carton 1 253 mm 185 mm 96 mm 0,78 kg

Images

Images de produits

  Taille du fichier
483,22 KB
  Taille de l'image
3360 px x 1980 px
  Caractéristiques
  •  Image claire du produit
  •  Recadré
Téléchargement

Plans

  Taille du fichier
5,4 KB
  Taille de l'image
304 px x 89 px
  Caractéristiques
  •  Image claire du produit
  •  Recadré
Téléchargement