Logo Oventrop GmbH & Co. KG

Station d'eau chaude sanitaire Regumaq XH
avec Wilo-Yonos PARA RS 130 15-7 PWM2, échangeur de chaleur en acier inoxydable brasé au cuivre


Regumaq XH fresh water station with Wilo Yonos RS RWM 15/7 pump, heat exchanger copper brazed

Hydronically controlled product assembly with heat exchanger for the hygienic heating of potable water according to the continuous flow principle. The potable water is heated at the moment it is needed: Just in time. Depending on the draw-off quantity on the potable water side, the circulation pump on the primary side is started and the volume flow is controlled. The brazed plate heat exchanger meets the requirements of the European Pressure Equipment Directive (PED). Due to the turbulent flow guidance, a good self-cleaning effect is achieved and thus contamination is prevented.

With Wilo high-efficiency pump Yonos RS RWM 15/7 in the buffer storage cylinder circuit.

Recommended discharge capacity: 15-20 l/min, depending on the set potable water temperature and the existing buffer storage cylinder temperature.

Adjustable potable water temperature: 40 - 60 °C

Connections:
G ¾ flat sealing for connection to the potable water circuit.
G 1 flat sealing for connection to the buffer storage cylinder circuit.

Consisting of:

Potable water circuit:
- Flow controller
- Connection for circulation pipe (G ¾)
- Heat exchanger
- Temperature sensor
- Flow switch

Buffer storage cylinder circuit:
- Storage cylinder pump
- Heat exchanger
- Vent valve
- Flow controller
- Thermostatic valve
La production a été arrêtée
Réf.: 1381042
Fabricant: Oventrop GmbH & Co. KG
Sous réserve de modifications techniques.

Dimensions

Dimensions de l’article

Longueur Largeur Hauteur Poids
190 mm 400 mm 690 mm 15,05 kg

Unités de conditionnement

Type Quantité Longueur Largeur Hauteur Poids

Images

Images de produits

  Taille du fichier
1,5 MB
  Taille de l'image
5128 px x 5128 px
  Caractéristiques
  •  Image claire du produit
  •  Recadré
Téléchargement
  Taille du fichier
1,52 MB
  Taille de l'image
5128 px x 5128 px
  Caractéristiques
  •  Image claire du produit
  •  Recadré
Téléchargement

Plans

  Taille du fichier
123,9 KB
  Taille de l'image
595 px x 1057 px
  Caractéristiques
  •  Image claire du produit
  •  Recadré
Téléchargement

ETIM

Klassifizierung
ETIM 7.0
Caractéristique Valeur
largeur 400 mm
hauteur 690 mm
profondeur 186 mm
qualité du matériau acier inoxydable 316 (1.4401)
raccordement avance filetage extérieur
raccordement retour filetage extérieur
température max. 95 °C
Diamètre intérieur nominal raccordement d'eau chaude 3/4 pouce (20)
Diamètre intérieur nominal, eau potable froide 3/4 pouce (20)
pression de travail max. 600 bar
matériau interchangeable acier inoxydable
Raccord eau potable froide filetage extérieur
Raccord eau chaude filetage extérieur
Diamètre intérieur nominal alimentation 1 pouce (25)
Diamètre intérieur nominal retour 1 pouce (25)