Connection and piping set for fixing and piping of the instantaneous water heater module and the heating circuit manifold in conjunction with the Regudis W-HTE dwelling station in the flush-mounted cabinet, item no. 1344599, or in the surface-mounted cabinet, item no. 1344699.

The connection and piping set consists of the following components:

• 3 corrugated metal hoses for connecting the heating circuit manifold and the hot water outlet of the instantaneous water heater module to the Regudis W-HTE dwelling station
• 3 self-sealing double nipples as transition of the hot water outlet and the primary outlets at the Regudis W-HTE dwelling station
• 2 reducing nipples for G ½ connections at the instantaneous water heater module
• 2 elbows for connection to the heating circuit manifold
• Seals

When integrating the instantaneous water heater module with the connection and piping set into the cabinets mentioned above, please note that the maximum number of heating circuits is limited to 8. A differential pressure of up to 150 mbar and a volume flow of up to 600 l/h are possible in the heating circuit. The flow temperatures must be adjusted to the surface heating system. The compact design with 110 mm installation depth in conjunction with the Regudis W-HTE dwelling station is retained.