Logo Oventrop GmbH & Co. KG

Actuatoren

Aktor T Electrothermal actuators

Electrothermal actuators are used for heating, ventilation and air conditioning. The actuators can be used for room temperature control or as zone valves.
They can be used, for example, with conventional radiators, radiators with integrated valve sets, heating circuit distributors/collectors, radiant heating ceilings, cooling ceilings and induction units in conjunction with two point room thermostats.
All electrothermal actuators are protected against overvoltage, a varistor is not required.

Oventrop offers actuators in the variants “normally closed” and “normally open”. The model with auxiliary switch can switch e.g. a pump directly via the integrated, potential-free contact.

Aktor T - Accessories

Aktor M Electromotive actuators

Electromotive actuators are used for heating, ventilation and air conditioning. Amongst others, the actuators can be used for room temperature control. They can be used, for example, with conventional radiators, radiators with integrated valve sets, heating circuit distributors/collectors (except for item no. 1012710 / 11), radiant heating ceilings, cooling ceilings and induction units.

Oventrop offers electromotive actuators with and without communication interfaces.

Aktor M - Accessories

Actuators with radio interface

Electronic battery operated actuators for room temperature control at the radiator with communication interface:

The mote 420 wireless actuator can be used in combination with R-Tronic wireless thermostats (EnOcean) or be integrated into Smart Home systems (e.g. wibutler). The actuator is configured in the Smart Home system via app.

The mote 320 wireless actuator can be used in combination with R-Tronic wirless thermostats (proprietary radio communication). The actuator is configured at the R-Tronic wireless thermostat.

The mote 200 wireless actuator offers a stand-alone solution. The actuator with Bluetooth interface is configured via a mobile terminal or directly at the actuator.