Logo Oventrop GmbH & Co. KG

Centrala grzewcza "Regucor WHS"
type 1000, heat exchanger nickel brazed


Energy storage centre "Regucor WHS"

Modular system for solar-assisted supply of detached and semi-detached houses with heat and hot water. Storage cylinder and add-on groups coordinated functionally and thermodynamically, with integrated piping and plug-in cabling. For combination with classic (e.g. gas/oil) and regenerative heat generators (e.g. heat pump/solid fuel) in existing and new buildings.

Consisting of:

Buffer storage cylinder: System storage cylinder type 800, nominal content 770 litres Total height (without insulation): 1775 mm Diameter (without insulation): 790 mm Max. pivot height (without insulation): 1810 mm Connections: 8 x G 1½ female thread Max. operating pressure ps: 3 bar (coil 10 bar) Operating temperature ts: 95 °C (coil 110 °C) With removable 140 mm fleece insulation and integrated temperature layer unit. Connections and fixing positions coordinated with "Regucor WHS" storage cylinder add-on groups.

Add-on group Solar: "Regusol L-130" DN 20 with circulation pump Wilo TEC ST 15/7 PWM, flow measuring device 2-15 l/min., with safety group for riser installation 6 bar, connections G ¾ male thread according to DIN EN 16313 (cone "Euro")

Add-on group fresh water: "Regumaq XH" DN 20 Hydraulically controlled heat exchanger system for the hygienic heating of potable water on the flow principle. Recommended discharge capacity: 15-20 l/min., depending on the set potable water temperature and the existing buffer water temperature. Connections G ¾ male thread flat sealing, with high-efficiency pump Wilo-Yonos PARA RS 15-7 PWM2, temperature controller 40 °C - 70 °C, nickel brazed stainless steel heat exchanger.

Add-on group heating circuit: "Regumat M3-130" DN 20 For weather guided flow temperature control. Connections G 1 male thread, flat sealing. High-efficiency pump Wilo-Stratos PICO 15/1-6, with three-way mixing valve and actuator.

Multifunctional system controller: "Regtronic RS" for the control of the energy storage centre "Regucor WHS" and further installation components. Up to 13 free inputs and up to 9 free solid-state relay outputs. S-bus for the connection to the data logger "CS-BS", SD-card slot for data recording.
No longer produced
Art.No.: 1383567
EAN: 4026755394924
Producent: Oventrop GmbH & Co. KG
Subject to technical changes.

Wymiary

Wymiary produktu

Długość Szerokość Wysokość Ciężar
1600 mm 1200 mm 2380 mm 254 kg

Jednostka opakowaniowa

Rodzaj Ilość Długość Szerokość Wysokość Ciężar
Carton 1 1600 mm 1200 mm 2510 mm 274 kg

BIM/CAD

Wskazówki do przeglądarki CAD.

In order to open the CAD-Viewer and Download CAD-Data please onetime download and install the CAD-App.

Zdjęcia

Product images

  Wielkość pliku
2,76 MB
  Rozmiar zdjęcia
5551 px x 5567 px
  Właściwości
  •  Jednoznaczne zdjęcie produktu
  •  Dopuszczony
Download

Drawings

  Wielkość pliku
55,99 KB
  Rozmiar zdjęcia
598 px x 1212 px
  Właściwości
  •  Jednoznaczne zdjęcie produktu
  •  Dopuszczony
Download

Dokumentacja

Brochure

  Plik Wielkość pliku
more languages 83,67 KB
more languages 4,79 MB