Dwelling station "Regudis W-HTF"
17 l/min., heat exchanger nickel brazed, direct heating circuit


OVENTROP-"Regudis W-HTF" Dwelling station with constant temperature circuit Hot potable water performance range -17 l/min.

For the supply of heat and cold and hot potable water to individual dwellings without using auxiliary energy. Station completely pre-assembled on a base plate, leakage and function tested at works.

Consisting of:

-Nickel brazed stainless steel heat exchanger, vertically installed, which reduces the risk of calcification
-Proportional flow controller with potable water priority function and integrated cold water throttling disc (the components of the potable water circuit are coated)
-Thermostatic temperature controller with quick- acting sensor for the control of the hot water outlet temperature
-Spacer for heat meter installation 110 mm, G ¾ with reducer for sensor connection G ½ for use of direct immersion sensors
-Cold water dwelling connection with spacer for cold water meter 110 mm, G ¾ to meter the total water consumption of a dwelling
-Valve for zone control which can be equipped with an actuator
-Facility for the deaeration and draining of the heating circuit
-Differential pressure regulator in the primary return for differential pressure regulation during quickly alternating operational conditions when drawing off hot water
-Strainer in the primary supply and heating circuit return
-7 flat sealing G ¾ collar nuts for the connection of the station to the supply pipes and the potable water circuit of the dwelling
-Complete piping of the station made of stainless steel, 18 x1

Min. cold water pressure: without flow limiter: 2.0 bar
                                       with flow limiter: 2.5 bar
Min. differential pressure supply: 300 mbar
Draw off temperature tdraw off: 40 °C up to 70 °C
Min. flow temperature: tdraw off + 15 K

max. operating pressure: 10 bar
max. operating temperature: 90 °C
draw off
capacity: 17

Item no.: 1341152
EAN: 4026755394269
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical modifications without notice.
Dimensions of article
Length Width Height Weight
110 mm 565 mm 655 mm 16,32 kg
Packing units
Type Qty. Length Width Height Weight
Carton 1 135 mm 585 mm 670 mm 17,91 kg
Europallet 10 1200 mm 800 mm 845 mm 204 kg
Product pictures
  File size
99,02 KB
  Size
1024 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
Drawings
  File size
155,48 KB
  Size
970 px x 1024 px
  Properties
  •  Clear product picture
  •  Cutout
Download
Technical data
Manual
  Name Size
L_135608081.pdf 1,75 MB
L_134113080.pdf 10,68 MB
L_134103081.pdf 259,23 KB
L_134103144.pdf 697,23 KB
134103082.pdf 1,5 MB
L_135727081.pdf 798,95 KB
Klassifizierung
ETIM 7.0 EC012346
District heating unit
Property Value
Width 565 mm
Model Indirect
Height 665 mm
Depth 110 mm
Suitable for CH/tap water
Connection feed/return heating Internal thread
Connection supply Internal thread
Connection return Internal thread
With adapter for heat meter
With heat meter
Tap water power 42 kW
Adjustment range hot water temperature 40 - 70
Nominal internal diameter hot tap water 3/4 inch (20)
Nominal inner diameter cold tap water 3/4 inch (20)
Tap capacity at 60°C, continuous 17 l/min
Max. operating pressure 1000 kPa
Exchanger with dual separation
Cold tap water connection Internal thread
Hot tap water connection Internal thread
Nominal inner diameter heating 3/4 inch (20)
Nominal inner diameter of supply 3/4 inch (20)
Nominal inner diameter return 3/4 inch (20)