Logo Oventrop GmbH & Co. KG
Menu
Watch list
Select Language
Description Dimensions Images Documents

Regumaq X-70 Fresh water station
Heat exchanger copper brazed

Please wait!

Regumaq X-70 fresh water station with Regtronic RQ controller, heat exchanger copper brazed

Electronically controlled product assembly with heat exchanger for the hygienic heating of potable water according to the continuous flow principle. The potable water is heated at the moment it is needed: Just in time. For connection to the buffer storage cylinder. Depending on the temperature and the volume flow on the potable water side, the circulation pump on the primary side is speed-controlled.

The plate heat exchanger meets the requirements of the European Pressure Equipment Directive (PED). Due to the turbulent flow guidance, a good self-cleaning effect is achieved and thus contamination is prevented.

The plate heat exchanger can be flushed using the fill and drain cocks integrated in the primary and secondary circuit. The potable water circuit is protected by a 10 bar safety valve. The fittings of the heat exchanger system have flat sealing connections, are ready mounted on a support plate and tested for leaks.

The Regtronic RQ-B controller is fully wired with the internal electrical components and has a data bus (S-bus) for connection to the CS-BS data logger.

- Number of heat exchanger plates: 46
- Discharge capacity: 2 - 70 l/min., depending on the set potable water temperature and the existing buffer storage cylinder temperature
- Connections: G 1 ½ flat sealing for connection to the buffer storage cylinder and potable water circuit

Consisting of:

Potable water circuit:
- Volume flow sensor
- Safety valve 10 bar
- Electronic resistance thermometers
- 2 fill and drain cocks

Buffer storage cylinder circuit:
- Wilo PARA 25-180/9-87/iPWM2 circulation pump
- Ball valves with check valve with actuator

Controller functions:
- Hot potable water temperature control
- Circulation control (time programmable: thermal or demand-dependent)
- Thermal disinfection
- Reheating
- Alarm function

Dimensions (outer dimensions insulation): width: 660 mm, height: 875 mm, depth: 300 mm
New in the programme
Art.No.: 1381480
EAN: 4026755494990
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical changes.
Download GAEB


Download tender text

Accessories

Potable water circulation set for Regumaq X-80 fresh water station, without circulation pump
Item no. 1381590
High-efficiency circulation pump for Regumaq X-80 potable water circulation set, Wilo PARA BZ Z 15-130/7-50/SC
Item no. 1381591
High efficiency circulation pump for Regumaq X-80 potable water circulation set, Wilo PARA MAXO-Z 25-180-10-F02
Item no. 1381592
Shutoff unit for Regumaq X-80 fresh water station, with Hycocon HTZ two-way valve DN 40 and Aktor M 2P H motorized actuator
Item no. 1381078
Field module
Item no. 1159094
Collective fault module for Regumaq X-30/XZ-30/X-80 fresh water stations
Item no. 1381594
Return stratification ball valve DN 32, PN 16, IT, brass
Item no. 1381192
Return stratification ball valve DN 40, Rp 1½, kvs 47.00, PN 16, brass
Item no. 1381193
Return stratification ball valve DN 50, Rp 2, kvs 75.00, PN 16, brass
Item no. 1381194
Actuator for return stratification ball valve
Item no. 1381199
Installation relay for the connection of high-performance pumps (> 1A)
Item no. 1152089
Earthing clamp for Regumat DN 20 - DN 32 and Regumaq X-25/X-45/X-80
Item no. 1359995
Earthing clamp für Regumat stations for heating circuits and Regumaq fresh water stations X-80 DN 40 - DN 50
Item no. 1359996
Aquastrom P Water sampling valve DN 8, PN 10, flammable, bronze/stainless steel, G ¼
Item no. 4209102
Aquastrom P Water sampling valve DN 10, PN 10, flammable, bronze/stainless steel, G ⅜
Item no. 4209103

Connection technology

Pump connection piece for boiler and storage cylinder connection to the pipework G 1 ½ IT x G 1 union nut, 32 mm
Item no. 1359091
Connection fitting G 1 IT x G 1 IT
Item no. 1381585
Connection fitting G 1 ½ IT x G 1 IT
Item no. 1381587

Spare parts

Heat exchanger for Regumaq X-80 fresh water station, copper brazed
Item no. 1381595
Heat exchanger for Regumaq X-80, copper brazed, with Sealix® protective layer
Item no. 1381584
Optibal TW Ball valve for potable water with external thread and drain bore G ¼ closed with a plug DN 32, G 1 ½, bronze
Item no. 4208910
Volume flow sensor
Item no. 1381693
Temperature sensor for Regumaq X-30/XZ-30 fresh water stations with Regtronic RQ controller, potable water hot, screw-in sensor PT 1000
Item no. 1389052
High-efficiency pump for Regumaq X-70 fresh water station, for primary circuit, Wilo PARA 25-180/9-87/iPWM2
Item no. 1381499
Valve assembly for Regumaq X-80
Item no. 9010506
Actuator for Regumaq X-80
Item no. 9010507
Regtronic RQ Controller for Regumaq X-80 fresh water station
Item no. 1381597

Dimensions

Dimensions of article

Length Width Height Weight
300 mm 660 mm 875 mm 38,26 kg

Packing units

Type Qty. Length Width Height Weight
Carton 1 889 mm 776 mm 335 mm 0 kg

Images

Product images

  File size
3,34 MB
  Size
5906 px x 5906 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
3,89 MB
  Size
5906 px x 5906 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Drawings

  File size
11,75 KB
  Size
375 px x 497 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
13,31 KB
  Size
425 px x 425 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Dimensional drawings

  File size
36,5 KB
  Size
560 px x 811 px
  Properties
  •  Clear product picture
  •  Cutout
Download