Logo Oventrop GmbH & Co. KG

Regumaq X-80 Fresh water station
Heat exchanger copper brazed, with Sealix® protective layer


Regumaq X-80 fresh water station with Regtronic RQ controller, heat exchanger copper brazed with Sealix® protective layer

Electronically controlled product assembly with heat exchanger for the hygienic heating of potable water according to the continuous flow principle. The potable water is heated at the moment it is needed: Just in time. For connection to the buffer storage cylinder. Depending on the temperature and the volume flow on the potable water side, the circulation pump on the primary side is speed-controlled.

The plate heat exchanger meets the requirements of the European Pressure Equipment Directive (PED). Due to the turbulent flow guidance, a good self-cleaning effect is achieved and thus contamination is prevented.

The plate heat exchanger can be flushed using the fill and drain cocks integrated in the primary and secondary circuit. The potable water circuit is protected by a 10 bar safety valve. The fittings of the heat exchanger system have flat sealing connections, are ready mounted on a support plate and tested for leaks.

The Regtronic RQ controller is fully wired with the internal electrical components and has a data bus (S-bus) for connection to the CS-BS data logger.

- Number of heat exchanger plates: 46
- Discharge capacity: 2 - 80 l/min., depending on the set potable water temperature and the exisiting buffer storage cylinder temperature
- Connections: G 1 ½ flat sealing for connection to the buffer storage cylinder and potable water circuit

Consisting of:

Potable water circuit:
- Volume flow sensor
- Safety valve 10 bar
- Electronic resistance thermometers
- 2 fill and drain cocks

Buffer storage cylinder circuit:
- Grundfos UPML 25-105 PWM circulation pump
- Ball valves with check valve with actuator

Controller functions:
- Hot potable water temperature control
- Circulation control (time programmable: thermal or demand-dependent)
- Thermal disinfection
- Reheating
- Alarm function

Dimensions (outer dimensions insulation): width: 660 mm, height: 875 mm, depth: 300 mm
Art.No.: 1381582
EAN: 4026755434118
Manufacturer: Oventrop GmbH & Co. KG
Subject to technical changes.

Accessories

Potable water circulation set for Regumaq X-80 fresh water station, without circulation pump
Item no. 1381590
High-efficiency circulation pump for Regumaq X-80 potable water circulation set, Wilo PARA BZ Z 15-130/7-50/SC
Item no. 1381591
High efficiency circulation pump for Regumaq X-80 potable water circulation set, Wilo PARA MAXO-Z 25-180-10-F02
Item no. 1381592
Shutoff unit for Regumaq X-80 fresh water station, with Hycocon HTZ two-way valve DN 40 and Aktor M 2P H motorized actuator
Item no. 1381078

Item no. 1159094
Collective fault module for Regumaq X-80 and Regumaq X-30/XZ-30 fresh water stations
Item no. 1381594
Return stratification ball valve DN 32, PN 16, IT, brass
Item no. 1381192
Return stratification ball valve DN 40, PN 16, IT, brass
Item no. 1381193
Return stratification ball valve DN 50, PN 16, IT, brass
Item no. 1381194
Actuator for return stratification ball valve
Item no. 1381199
Installation relay for the connection of high-performance pumps (> 1A)
Item no. 1152089
Earthing clamp for Regumat stations for heating circuits and Regumaq X-25/X-45/X-80 fresh water stations DN 20 - DN 32
Item no. 1359995
Earthing clamp für Regumat stations for heating circuits and Regumaq fresh water stations X-80 DN 40 - DN 50
Item no. 1359996
Aquastrom P Water sampling valve DN 8, PN 10, flame resistant, bronze/stainless steel, G ¼
Item no. 4209102
Aquastrom P Water sampling valve DN 10, PN 10, flame resistant, bronze/stainless steel, G ⅜
Item no. 4209103
Aquastrom R Backflow preventer with internal / external thread DN 40, 1 ¾ union nut x G 1 ¾ ET, straight, bronze
Item no. 4208612
Aquastrom R Backflow preventer with external thread DN 40, G 1 ¾ x G 1 ¾, straight, bronze
Item no. 4208712
Aquanova Magnum Water filter with internal thread DN 25, Rp 1, PN 16, with transparent plastic cup, 95 - 140 µm
Item no. 6120008
Aquanova Magnum Water filter with internal thread DN 32, Rp 1 ¼, PN 16, with transparent plastic cup, 95 - 140 µm
Item no. 6120010
Aquanova Magnum Water filter with internal thread DN 40, Rp 1 ½, PN 16, with transparent plastic cup, 95 - 140 µm
Item no. 6120012
Aquanova Magnum Water filter with internal thread DN 50, Rp 2, PN 16, with transparent plastic cup, 95 - 140 µm
Item no. 6120016

OV Spare Parts Finder

Dimensions

Dimensions of article

Length Width Height Weight
300 mm 660 mm 875 mm 38,8 kg

Packing units

Type Qty. Length Width Height Weight
Carton 1 335 mm 685 mm 895 mm 41,38 kg
Europallet 3 1200 mm 800 mm 1160 mm 137,4 kg

BIM/CAD

Download CAD-Formats
Format Size Download
Revit 556 KB
Download
DWG (3D) 157,31 KB
Download
DWG 40,98 KB
Download
DXF (3D) 1,11 MB
Download
DXF 196,28 KB
Download
STEP 380,18 KB
Download

Notice for CAD viewer

In order to open the CAD-Viewer and Download CAD-Data please onetime download and install the CAD-App.

Images

Product images

  File size
3,34 MB
  Size
5906 px x 5906 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
3,89 MB
  Size
5906 px x 5906 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Dimensional drawings

  File size
60,99 KB
  Size
560 px x 811 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Drawings

  File size
23,51 KB
  Size
425 px x 425 px
  Properties
  •  Clear product picture
  •  Cutout
Download
  File size
24,59 KB
  Size
375 px x 497 px
  Properties
  •  Clear product picture
  •  Cutout
Download

Documents

ETIM

Klassifizierung
ETIM 7.0 EC010869
Hot tap water heater, indirectly fired
Property Value
Width 660 mm
Height 875 mm
Depth 300 mm
Material quality Stainless steel 316 (1.4401)
Connection supply External thread
Connection return External thread
Max. temperature 95 °C
Nominal internal diameter hot tap water 1 1/2 inch (40)
Nominal inner diameter cold tap water 1 1/2 inch (40)
Max. operating pressure 1000 bar
Exchanger material Stainless steel
Cold tap water connection External thread
Hot tap water connection External thread
Nominal inner diameter of supply 1 1/2 inch (40)
Nominal inner diameter return 1 1/2 inch (40)