DynaTemp CW-BS Thermal balancing in potable water circulation systems

The control unit (DDC) assumes optimisation tasks in the system hydraulics, which is determined here by maintaining a sufficiently high potable water circulation temperature (according to DVGW 57 °C). The temperature is sensed by the Oventrop Aquastrom DT valve for potable water circulation systems. The temperature values of the sensor are transmitted by the bus-based field module to the DDC CW-BS control unit which transmits the control commands via the field module to the Aquastrom DT valve. A further task of the control unit is the control and regulation of thermal disinfection. Here, the control unit generates a start signal for the boiler control to increase the potable water temperature and then the pipelines of the circulation system are sequentially thermally disinefected. The operator of the system also has the option of automatically receiving the disinfection log and any fault messages by e-mail. Settings and temperature curves of the system can be documented in the control unit.

The control unit can be connected via BACnet IP to the building management system (BMS) for monitoring and visualisation tasks and can send warning messages via LAN or Internet.

Note: The FM-CW Plus field module (item no. 1153321) is required at least once per system, the Sensor LW TQ (item no. 1150090) is required at least three times per system.

DynaTemp CW-BS Thermal balancing in potable water circulation systems

DDC CW-BS Control unit with bus technology, for the connection of up to 31 C-bus field modules, operating/bus voltage 24 V AC, frequency 50 Hz, surface mounting Art. No. 1153350

TR-80 Transformer TR-80 Transformer

For power supply of the DDC, field modules, relay modules and circulation valves.

Primary power: 230 V AC
Secondary power: 24 V AC
Power: 80 VA
Frequency: 50 Hz Art. No. 1153053

TR-250 Transformer for power supply of the DDC, field modules, relay modules, circulation valves, room modules, thermostats and actuators, power 250 VA Art. No. 1153055

Aquastrom DT Electronic circulation regulating valve with internal thread and FM-CW K field module DN 15, Rp ½ x Rp ½ Art. No. 1150004

Aquastrom DT Electronic circulation regulating valve with internal thread and FM-CW K field module DN 20, G 1 x G 1 Art. No. 1150006

Aquastrom DT Electronic circulation regulating valve with internal thread and FM-CW K field module DN 25, Rp 1 x Rp 1 Art. No. 1150008

Aquastrom DT Electronic circulation regulating valve with flat sealing external thread and FM-CW K field module DN 15, G ¾ x G ¾ Art. No. 1150104

Aquastrom DT Electronic circulation regulating valve with flat sealing external thread and FM-CW K field module DN 20, G 1 x G 1 Art. No. 1150106

Aquastrom DT Electronic circulation regulating valve with flat sealing external thread and FM-CW K field module DN 25, G 1 ¼ x G 1 ¼ Art. No. 1150108

Electronic circulation valve Aquastrom TD DN 15, Rp ½, with FM-CW K field module Art. No. 4205004

Electronic circulation valve Aquastrom TD DN 20, Rp ¾, with FM-CW K field module Art. No. 4205006

Electronic circulation valve Aquastrom TD DN 15, G ¾, with FM-CW K field module Art. No. 4205104

Electronic circulation valve Aquastrom TD DN 20, G 1, with FM-CW K field module Art. No. 4205106

FM-CW Plus Field module for temperature sensing with C-bus communication, 24 V AC, 50 Hz, surface mounting Art. No. 1153321

REM-CW Relay module for burner activation with analogue input (0 - 10 V), 24 V AC Art. No. 1153331

Sensor LW TH Temperature sensor for temperature measurement and detection in immesion sleeves and storage cylinders, PT 1000 sensor element, continuous temperature range up to 105°C, length 3 m Art. No. 1369093

Sensor LW TH Temperature sensor for temperature measurement and detection at collectors, PT 1000 sensor element, continuous temperature range up to 180°C, length 2 m Art. No. 1369094

Temperature sensor attached to the pipe for temperature measurement and detection at the pipework, with fastening clip Ø 25 - 40 mm and heat conducting paste, PT 1000 sensor element, continuous temperature range up to 180°C, length 1.5 m Art. No. 1369095

FM-CW K Field module with C-bus communication, 24 V AC, 50 Hz, surface mounting Art. No. 1153301