MyOV is your exclusive entrance to the world of Oventrop. From here you have access to our whole range of service offers and much more!
Register now for free within a few minutes!
The Cofloor drywall system consists of drywall elements and matching heat/cooling conducting lamellas. The drywall basic element consists of 25 mm thick foamed PS (polystyrene). It is a thermal insulation and at the same time a support element for the individual heat/cooling conducting lamellas and bends. The special arrangement of the grooves in the basic elements allows both a meandering and a bifilar (spiral) installation of the Oventrop Copipe HSC multi-layer composite pipe 14 x 2 mm.
We recommend the installation of the Copipe HSC multi-layer composite pipe due to its lower expansion coefficient during heating operation compared to the Copex PE-Xc and Copert PE-RT plastic pipes. The heat/cooling conducting lamellas are made of 0.4 mm thick and the heat/cooling conducting bends of 0.5 mm thick galvanised sheet steel and enable optimum heat/cooling transport into the drywall elements or into the cement or liquid screed. The practicable predetermined breaking points on the heat/cooling conducting lamellas (sheet length 998 mm) enable optimal laying of the pipes in the rooms.