Regudis W-HTF dwelling station
Nominal draw-off quantity: 15 l/min

For the supply of a dwelling with heating water and potable water. Product assembly completely mounted on a base plate. The station is tested for tightness and function.

Version with mixed heating circuit and high temperature outlet.

Consisting of:

- Copper brazed stainless steel heat exchanger, vertically installed to reduce the risk of calcification
- Proportional flow controller with potable water priority circuit and built-in cold water throttle disc, components of the potable water circuit coated
- Thermostatic temperature controller with fast-response sensor for controlling the hot water outlet temperature
- Spacer for installation of a heat meter 110 mm, G ¾, with reducer for sensor connection G ½ for the use of directly immersed sensors
- Cold water outlet dwelling with spacer for water meter 110 mm, G ¾, for metering the cold water consumption of the dwelling
- Zone valve for volume flow adjustment of the dwelling heating with the option of mounting an optional actuator
- Venting and draining option of the heating circuit
- Differential pressure control valve in the primary return for maintaining the differential pressure during rapid load changes when tapping hot water
- Strainer in the primary supply and in the heating circuit return
- 7 union nuts G ¾, flat sealing, for connecting the station to the supply pipes and to the heating circuit and potable water circuit of the dwelling
- All pipelines made of stainless steel, 18 x 1

With injection circuit to control the flow temperature, but with additional outlet for a radiator circuit.

With pump Wilo Yonos Para RS 15/1 - 6 RKA

Min. cold water pressure: 2.5 bar
Min. differential pressure supply: 300 mbar
Draw-off temperature: t_draw-off = 45 °C - 60 °C
Min. flow temperature: t_draw-off + 15 K