Logo Oventrop GmbH & Co. KG

Room thermostats

ClimaCon F Room thermostats for surface heating

Die ClimaCon F Raumthermostate dienen der Temperaturregelung von Flächenheizungs- und -kühlanlagen sowie von Heiz- und Kühldecken in Einfamilienhäusern oder Wohnungen. Je nach Raumthermostat ist eine Umschaltung zwischen Heizen und Kühlen über ein Change-Over Signal z. B. der Wärmepumpe möglich.
Die ClimaCon F Raumthermostate können in Kombination mit elektrothermischen Stellantrieben (z. B. Aktor T 2P) verwendet werden. Alternativ ist die Anbindung an eine Anschlussleiste (z. B. FloorCon) möglich. Durch die einfache Aufputzinstallation und schnelle Konfiguration ist das Produkt sehr handwerkerfreundlich.
Je nach Ausführung gibt es Raumthermostate mit reduziertem Display, mit integrierter Zeitschaltuhr und Einstellmöglichkeiten per App.

ClimaCon F Zubehör

Room thermostats heating

Room thermostats are used in conjunction with actuators for individual room temperature control in heating systems. The temperature is set at the room thermostat. Depending on the room thermostat used, the temperature is reduced via an adjustable time programme or an external time switch.
Room thermostats can also be used for cooling applications by using a different actuator (e.g. “normally closed” instead of “normally open”). 

Oventrop offers room thermostats for surface- or flush-mounted installation, with or without display.

Room thermostats heating/cooling

Room thermostats are used in conjunction with electromotive or electrothermal actuators for individual room temperature control in heating and cooling systems. This room thermostat can also be used in three or four pipe systems and has an adjustable neutral zone between heating and cooling stage. The temperature is set at the room thermostat.

Room thermostats heating/cooling with fan control

Room thermostats for electrical control of fan coil units for demand-oriented heating and cooling. Depending on the room thermostat, fan coil units in two or four pipe systems can be controlled. 
The temperature as well as the fan speed can be set at the room thermostat. Furthermore, various operating modes can be set.

Room thermostats Accessories

R-Tronic Funkthermostate

Oventrop offers wireless thermostats with two types of radio communication:
The R-Tronic wireless thermostats with open radio communication according to EnOcean standard can be integrated directly into Smart Home systems.
The R-Tronic wireless thermostats with closed radio communication ( proprietary) are used in stand-alone operation in connection with wireless actuators to control radiators or in connection with a multi-channel wireless receiver to control surface heating systems.

The temperature setting as well as the storage of time programmes is carried out at the wireless thermostat or in the app of the Smart Home System. Depending on the model, an additional measurement of the relative humidity in % and the CO2 concentration in ppm is possible.
Power is supplied by batteries or a power pack (100 - 240 V). For the battery-operated models, power supply via the mains is possible as an alternative (see chapter “R-Tronic Accessories”).

For the closed R-Tronic system, the following applies: In battery operation, up to 3 participants can be taught in, in mains operation, up to 8 participants can be taught in. In mains operation it is also possible to teach in wireless actuators, window contacts and a single-channel wireless receiver. The single-channel wireless receiver enables the control of a fan depending on the set CO2 threshold value. For this application a thermostat must be used which can measure the CO2 concentration.

R-Tronic Accessories